KINGSTON BRASS
KINGSTON BRASS KS4308BX Roman Tub Filler Brushed Nickel bath faucet part
Solid brass Roman tub filler with ceramic disc cartridge, 7.0 GPM flow rate and 8-1/2" spout reach for deck-mount installation
- TypeTools
- Solid brass construction ensures long-lasting durability
- Drip-free ceramic disc cartridge prevents leaks
- Deck mount three-hole installation fits standard tubs
- 0 GPM flow rate at 80 PSI delivers strong water pressure
- Corrosion-resistant brushed nickel finish maintains appearance
Solid Brass Roman Tub Filler
The Kingston Brass KS4308BX is a deck-mounted Roman tub filler built from solid brass with a brushed nickel finish. It uses a 3-hole configuration and dual cross handles for hot and cold control. The drip-free ceramic disc cartridge provides reliable shut-off. It suits homeowners upgrading a standard three-hole tub deck.
Ceramic Disc Cartridge and 3/4 Inch IPS Inlets
The ceramic disc cartridge eliminates the rubber washers that wear out on older stems, so the handles turn smoothly and seal without dripping. The 3/4 inch IPS inlet connections accept standard supply lines directly, reducing the need for extra adapters during installation. The corrosion-resistant finish protects the brass body from water spotting.
7.0 GPM Flow Rate at 80 PSI
The spout delivers 7.0 gallons per minute when supply pressure reaches 80 PSI; lower household pressure will reduce actual flow. The 8-1/2 inch spout reach may not extend far enough for oversized or deep-soaking tubs. Buyers who need higher flow or longer reach should verify their plumbing and tub dimensions before purchase.
Highlights
- Solid brass construction ensures long-lasting durability
- Drip-free ceramic disc cartridge prevents leaks
- Deck mount three-hole installation fits standard tubs
- 0 GPM flow rate at 80 PSI delivers strong water pressure
- Corrosion-resistant brushed nickel finish maintains appearance
Specifications
| Brand | KINGSTON BRASS |
|---|---|
| Type | Tools |
Questions about this item
Will the ceramic disc cartridge need replacing, and how often?
The drip-free ceramic disc cartridge is built for long service; replacement is only needed if wear eventually causes a leak, which typically takes many years of normal use.
What flow rate can I expect at the rated 80 PSI supply pressure?
The spout delivers 7.0 GPM or 26.5 LPM at 80 PSI, so sustained use will not exceed that volume.
Does the solid brass body and brushed nickel finish stay cool and quiet during continuous flow?
Brass conducts heat, so the body will warm to water temperature, but the valve operates quietly with no pump or motor noise.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



