KINGSTON BRASS
KINGSTON BRASS Concord Twin Brass Handle 4 Lavatory Faucet Oil Rubbed Bronze
Two-handle centreset lavatory faucet with solid brass construction, ceramic disc cartridges and a 2.2 gpm aerator in oil-rubbed bronze
- TypeBath Accessories
- StyleContemporary
- Solid brass body resists corrosion
- Quarter-turn ceramic discs give smooth, drip-free control
- 2 GPM flow meets efficiency standards
- 75-inch spout reach clears the basin
- Matching pop-up drain included for a complete install
Two-Handle Brass Lavatory Faucet
The Kingston Brass Concord model is a two-handle deck-mount faucet built from solid brass with an oil-rubbed bronze finish. It installs on a three-hole sink with a four-inch centerset spread. Ceramic disc cartridges provide quarter-turn on/off control and a 2.2 gpm (8.3 lpm) maximum flow rate at 60 psi. A matching pop-up drain assembly is included.
Upgrade from Single-Handle or Worn Fixtures
This faucet replaces a single-lever unit when separate hot and cold handles are preferred, or it refreshes an aging brass fixture that shows corrosion. The quarter-turn ceramic cartridges eliminate the drips common with older compression stems. The oil-rubbed bronze coating resists tarnish, so the finish stays consistent longer than untreated brass or plated alternatives.
Deck-Mount Build Requirements
Installation needs a countertop or sink deck no thicker than 1.25 inches to accommodate the half-inch IPS male-threaded shank inlets. The spout reaches 4.75 inches from the faucet body and stands 6 inches tall, clearing most vessel or under-mount bowls. The integrated removable aerator allows easy cleaning without tools, and the two metal lever handles operate independently for precise temperature balance.
Highlights
- Solid brass body resists corrosion
- Quarter-turn ceramic discs give smooth, drip-free control
- 2 GPM flow meets efficiency standards
- 75-inch spout reach clears the basin
- Matching pop-up drain included for a complete install
Specifications
| Brand | Kingston Brass |
|---|---|
| Type | Bath Accessories |
| Style | Contemporary |
Questions about this item
What sink hole spacing does the 4-inch centerset require?
The faucet needs three holes with a 4-inch center spread for deck mounting.
How do I connect the supply lines to the 1/2-inch IPS male shanks?
Thread flexible supply connectors onto the 1/2-inch IPS male shanks and tighten with a wrench; the step often missed is checking for leaks before final tightening.
When should I clean or replace the integrated aerator?
Remove and soak the aerator in vinegar if flow drops below the 2.2 gpm rate; replace it if mineral buildup persists after cleaning.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



