We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass quarter-turn angle stop valve with lever handle, polished chrome finish

KINGSTON BRASS

KINGSTON BRASS CC43108KLK Quarter-Turn Angle Stop Valve

SKU CH-Z0MQ-TANTS

Quarter-turn angle stop valve with 1/2" FIP and 3/8" OD compression connections shuts off water at the source

  • TypeTools
  • Quarter-turn handle stops water flow at the source with a simple turn
  • Corrosion-resistant finish protects the valve surface for lasting appearance
  • Easy-to-remove handle simplifies maintenance and replacement tasks
  • 1/2-inch FIP inlet connects to standard supply lines for direct installation
  • 3/8-inch OD compression outlet fits common fixture connections without adapters

Quarter-Turn Angle Stop Valve

The Kingston Brass CC43108KLK is a quarter-turn angle stop valve designed to shut off water supply at the source. It connects a 1/2 inch FIP inlet to a 3/8 inch OD compression outlet for reliable flow control.

Upgrade From Multi-Turn Valves

Replacing older multi-turn valves with this quarter-turn model reduces the effort needed to stop water flow and minimises wear on internal seals. The jump is worth it when existing valves are stiff, dripping or difficult to operate during maintenance.

Check Inlet And Outlet Compatibility

Verify that your supply line uses a 1/2 inch FIP thread and that the fixture connection accepts a 3/8 inch OD compression fitting. Confirm the valve orientation matches an angle stop configuration before ordering.

Highlights

  • Quarter-turn handle stops water flow at the source with a simple turn
  • Corrosion-resistant finish protects the valve surface for lasting appearance
  • Easy-to-remove handle simplifies maintenance and replacement tasks
  • 1/2-inch FIP inlet connects to standard supply lines for direct installation
  • 3/8-inch OD compression outlet fits common fixture connections without adapters

Specifications

BrandKINGSTON BRASS
TypeTools

Questions about this item

What size supply line and outlet does the CC43108KLK angle stop valve connect to?

The valve has a 1/2 inch FIP inlet and a 3/8 inch OD compression outlet for standard supply connections.

How do you install the quarter-turn angle stop valve without damaging the compression fitting?

Slide the compression nut and ferrule onto the tubing, insert fully into the valve outlet, then tighten the nut by hand plus one quarter turn with a wrench.

When should the internal cartridge or seals be replaced on this Kingston Brass shut-off valve?

Replace the quarter-turn cartridge if the handle becomes stiff, water seeps past the closed position, or the valve body shows external corrosion.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.