KingSener
KingSener M5070A DRX-1 14.6V 2510mAh laptop battery
Rechargeable 14.6V 2510mAh Li-ion battery replaces Carestream DRX-1 441400052 and P/N8G5132 for extended imaging sessions
- Battery Voltage14.6V
- Battery Capacity2510mAh/35.4Wh
- Reliable power delivery for clinical Carestream DRX-1 operation
- Direct replacement for part numbers 441400052, P/N8G5132, 8G5132
- Extended imaging sessions with 2510mAh 35.4Wh Li-ion capacity
- Rigorous quality control meeting healthcare safety standards
- Consistent performance backed by 1-year warranty
Replacement battery for Carestream DRX-1
The KingSener M5070A DRX-1 is a 14.6V 2510mAh lithium-ion battery built to replace the original Carestream 441400052 and P/N8G5132 packs. It delivers 35.4Wh of energy for DRX-1 and DR imaging systems in clinical environments.
Clinical users needing a direct swap
This unit suits technicians who require a brand-new, same-size replacement that matches the original part numbers exactly. It is not for buyers who need a different voltage, a higher capacity, or a battery for any other device model.
14.6V 2510mAh capacity match
The 14.6V output and 2510mAh rating determine whether this pack powers your specific Carestream system correctly. Verify the original battery shows 441400052 or 8G5132 before ordering.
Highlights
- Reliable power delivery for clinical Carestream DRX-1 operation
- Direct replacement for part numbers 441400052, P/N8G5132, 8G5132
- Extended imaging sessions with 2510mAh 35.4Wh Li-ion capacity
- Rigorous quality control meeting healthcare safety standards
- Consistent performance backed by 1-year warranty
Specifications
| Brand | KingSener |
|---|---|
| Model | DRX-1 |
| Part Number | DRX-1 441400052 P/N8G5132 8G5132 |
| Battery Voltage | 14.6V |
| Battery Capacity | 2510mAh/35.4Wh |
Questions about this item
What voltage does the 14.6V DRX-1 battery deliver to the Carestream system?
The KingSener DRX-1 supplies a nominal 14.6V to compatible Carestream DRX-1 and DR systems, matching the original 441400052 specification.
Will the M5070A pack fit the original DRX-1 battery bay without modification?
Yes, the DRX-1 replacement uses the same physical dimensions as the OEM 8G5132 unit, so it slides into the existing compartment with no adapter or bracket needed.
How should I perform the first charge cycles on the new 2510mAh Li-ion cell?
Fully charge and discharge the battery from low current two or three times to condition the cells before regular clinical use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



