We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two small black rectangular PoE splitter units side by side

KINGARD

KINGARD Active PoE Splitter 48V to 12V 10/100Mbps 2 Pack

SKU CH-KXZF-EH7AE

Converts 48 V PoE to 12 V at 15.4 W for IP cameras, phones or wireless APs up to 100 m, two splitters included

  • TypeAccessories
  • Powers 12V devices from PoE switches with 15.4W output
  • Delivers data up to 100Mbps over distances up to 100m
  • Accepts 44–57V input with built-in overvoltage protection
  • Works instantly with IP cameras, phones and wireless APs
  • Includes two splitters with 5.5mm × 2.1mm DC jacks

KINGARD Active PoE Splitter 48V to 12V

This KINGARD Active PoE Splitter converts 48V Power over Ethernet into 12V DC at 15.4W. The two-pack supplies IEEE 802.3af compliant power to non-PoE devices such as IP cameras, wireless access points and VoIP phones. Installation is plug-and-play with no configuration required.

Thermals noise and power draw

The splitter draws 44-57V DC from a standard PoE switch and delivers a regulated 12V 1A output with overvoltage protection. It passes 10/100Mbps data through to the connected device without active cooling or moving parts. Power consumption matches the attached 12V load up to the 15.4W limit.

5.5 x 2.1 mm DC jack constraint

The fixed 5.5 mm by 2.1 mm barrel connector determines which 12V equipment can be powered directly. Devices with a different jack size or polarity need an adapter cable not included in the pack. Buyers whose hardware uses terminal blocks, screw terminals or a larger barrel plug cannot connect without extra parts.

Highlights

  • Powers 12V devices from PoE switches with 15.4W output
  • Delivers data up to 100Mbps over distances up to 100m
  • Accepts 44–57V input with built-in overvoltage protection
  • Works instantly with IP cameras, phones and wireless APs
  • Includes two splitters with 5.5mm × 2.1mm DC jacks

Specifications

TypeAccessories

Questions about this item

How do I install the KINGARD PoE splitter and what step is often missed?

Connect the PoE switch to the splitter's input port, then attach your 12V device to the 5.5×2.1mm DC jack; the step often missed is confirming the switch delivers 44–57V DC so the splitter can output 12V/1A.

What maintenance or replacement will the splitter need later?

The unit has no moving parts or filters; only the 5.5×2.1mm DC plug or Ethernet cables may wear over time and need replacement if they become loose or damaged.

What limit appears first under sustained use?

The 10/100 Mbps Ethernet port caps data throughput at 100 Mbps, so sustained traffic will hit that bandwidth ceiling before the 15.4W power budget is reached.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.