We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four small black rectangular PoE splitter adapters with Ethernet ports and 5.5mm DC jacks

KINGARD

KINGARD 4-Pack PoE Splitter 12V 1.5A 18W IEEE 802.3af 10/100Mbps

SKU CH-XXN7-4ZG0K

Four PoE splitters convert 44-54V input to 12V 1.5A for non-PoE cameras, phones and access points at 100Mbps

  • TypeAccessories
  • Powers 12V non-PoE devices via standard IEEE 802.3af PoE
  • Delivers up to 18W at 12V 1.5A from 44-54V PoE input
  • Maintains 10/100Mbps data while supplying power through single cable
  • Includes 5.5mm x 2.1mm DC jack for direct 12V device connection
  • Four splitters in one pack for multiple IP camera or access point installs

Four-pack PoE splitters for 12 V devices

This four-pack supplies DC 12 V at up to 1.5 A to non-PoE equipment such as IP cameras, VoIP phones or wireless access points. Each unit draws 44–54 V from an IEEE 802.3af source and delivers a maximum of 18 W through a 5.5 × 2.1 mm barrel jack. The kit is intended for installers who need to power several 12 V endpoints from a single PoE switch or injector.

Plug-and-play installation with polarity care

Connect the PoE input to the network cable coming from the switch, then attach the DC plug to the device’s power socket; no software configuration is required. The most common issue is reversing the barrel connector polarity, so verify the centre-positive marking before powering on. Ensure the source port actually provides 802.3af power, otherwise the splitter will stay inactive.

100 Mbps data pass-through and 18 W ceiling

The splitter passes Ethernet at 10/100 Mbps, so Gigabit links will fall back to Fast Ethernet speeds. Total output is capped at 18 W, meaning devices that draw more current than 1.5 A at 12 V cannot be supported. The 44–54 V input range also excludes passive PoE injectors that operate outside the 802.3af specification.

Highlights

  • Powers 12V non-PoE devices via standard IEEE 802.3af PoE
  • Delivers up to 18W at 12V 1.5A from 44-54V PoE input
  • Maintains 10/100Mbps data while supplying power through single cable
  • Includes 5.5mm x 2.1mm DC jack for direct 12V device connection
  • Four splitters in one pack for multiple IP camera or access point installs

Specifications

TypeAccessories

Questions about this item

How can I confirm each splitter is delivering 12V 1.5A to my IP camera after installation?

Measure the DC jack with a multimeter; it should read 12V while the camera powers on and streams at 100Mbps.

The pack contains four splitters — do I need separate Ethernet cables or a PoE switch to use them?

Yes, each unit requires a Cat5e or better cable from a PoE switch or injector supplying 44-54V; cables and switch are not included.

My devices need 12V 1A and 12V 2A — which of the four identical splitters should I assign to each?

All four splitters are identical 18W max units; use any splitter for the 1A device, but the 2A device exceeds the 1.5A limit so it cannot be powered safely.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.