We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four small rectangular PoE splitters with USB-C and Ethernet ports

KINGARD

KINGARD 4-Pack Gigabit PoE Splitter USB-C 5V 2.4A 802.3af

SKU CH-767E-AKMXJ

Four splitters convert 44-56V PoE into 5V 2.4A USB-C power with gigabit data for non-PoE devices

  • TypeUSB Wi-FI Adapter
  • Powers USB-C devices from PoE switches
  • Delivers 5V 2.4A through Type-C connector
  • Supports Gigabit Ethernet up to 1000Mbps
  • Works with IEEE 802.3af standard input
  • Ready to use without any configuration

Four-Pack Gigabit PoE Splitter

This four-pack provides four identical splitters that convert IEEE 802.3af power from a PoE switch or injector into a 5 V 2.4 A USB-C supply and a gigabit Ethernet data link. Each unit accepts 44 to 56 V DC input and delivers up to 12 W to the connected device without any configuration required.

Installers running non-PoE devices with USB-C power

Network technicians who need to place access points, cameras or IoT sensors where no mains socket exists will find these splitters a direct fit. Buyers whose equipment demands a different voltage, a barrel connector or more than 12 W of power should look at alternative power arrangements.

5 V 2.4 A USB-C output at 12 W

The splitter provides exactly 5 V at 2.4 A through a USB-C port while passing 10/100/1000 Mbps Ethernet data, making this output specification the deciding factor for compatibility with the target device.

Highlights

  • Powers USB-C devices from PoE switches
  • Delivers 5V 2.4A through Type-C connector
  • Supports Gigabit Ethernet up to 1000Mbps
  • Works with IEEE 802.3af standard input
  • Ready to use without any configuration

Specifications

TypeUSB Wi-FI Adapter

Questions about this item

Does the splitter run hot or draw much power when it powers a device all day?

It delivers up to 12 watts from a 44–56 V PoE source with no fan, so heat and noise stay minimal during continuous use.

What must I already have for this splitter to work?

A PoE switch or injector supplying IEEE 802.3 af power and a device that accepts 5 V over USB-C plus a wired Ethernet connection.

Will it slow down my older 100 Mbps switch or router?

The Gigabit port auto-negotiates down to 10 or 100 Mbps, so legacy equipment works without bottlenecking the link.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.