We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small white plastic box with two Ethernet ports and a barrel power socket

KINGARD

KINGARD 24V Passive PoE Injector 24W

SKU CH-7MX1-WR7SN

Delivers 24 V passive power over Ethernet to compatible access points, IP cameras and phones up to 328 ft

  • TypeAccessories
  • Powers 24 V PoE gear up to 328 ft over standard Ethernet cable
  • Delivers 24 W from a 1 A supply with no auto-negotiation
  • Works with 10/100 Mbps IP phones, APs and cameras from Ubiquiti, MikroTik and others
  • 24 V passive design — incompatible with 48 V 802.3af devices
  • Simple plug-and-play injector for remote 24 V PoE equipment

24V Passive PoE Injector 24W

This 24 volt passive Power over Ethernet injector supplies 24 watts at 1 amp to compatible devices. It powers 10/100Mbps equipment such as Ubiquiti, Mikrotik, and Tranzeo access points, IP phones, and cameras over CAT5 through CAT7 cable up to 328 feet. Power is delivered continuously without auto-negotiation. The unit is designed exclusively for 24V passive PoE hardware.

Compatibility check before ordering

Verify that your powered device requires 24V passive PoE and does not expect 48V 802.3af standard power. Confirm the device operates at 10/100Mbps speeds and accepts power on the spare pairs. Ensure your Ethernet cable run does not exceed 328 feet. This injector will not work with any 48V 802.3af equipment.

Who this suits and who should look elsewhere

Ideal for installers powering 24V passive PoE access points, IP cameras, or VoIP phones where a standard 48V supply is unsuitable. Not for buyers needing 802.3af or 802.3at compliant power, Gigabit data rates, or auto-negotiating power delivery. Builders with 48V-only devices must choose a different injector.

Highlights

  • Powers 24 V PoE gear up to 328 ft over standard Ethernet cable
  • Delivers 24 W from a 1 A supply with no auto-negotiation
  • Works with 10/100 Mbps IP phones, APs and cameras from Ubiquiti, MikroTik and others
  • 24 V passive design — incompatible with 48 V 802.3af devices
  • Simple plug-and-play injector for remote 24 V PoE equipment

Specifications

TypeAccessories

Questions about this item

What cables and power supply come in the box, and do I need to buy anything else to connect a 24V access point?

The injector includes a 24V 24W 1A power supply. You supply the CAT5/5e/6/7 Ethernet cable to run up to 328ft between the injector and the 24V PoE device.

How do I know whether my Ubiquiti or MikroTik gear needs this 24V passive injector instead of a 48V 802.3af model?

Check the device label: if it specifies 24V passive PoE (e.g. Ubiquiti POE-24-12W, POE-24-24W, POE-25-5W) this injector matches; if it states 802.3af or 48V PoE, you need the 48V version instead.

The spec lists 10/100Mbps and 328ft — what throughput and distance can I expect in practice?

The injector passes 10/100Mbps Ethernet and delivers 24V 1A power over CAT5/5e/6/7 cable up to 328ft, with power on continuously and no auto-negotiation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.