We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two small black PoE splitters with Ethernet and DC plugs

KINGARD

KINGARD 2-Pack 5V PoE Splitter 48V to 5V 2.4A 3.5mm 5.5mm

SKU CH-B957-V4KK0

Two 5V PoE splitters convert 48V input to 5V 2.4A output with 3.5mm and 5.5mm plugs for 10/100Mbps devices

  • TypeAccessories
  • Powers 5 V devices from 48 V PoE with 2.4 A output
  • Delivers 12 W max through 3.5 mm and 5.5 mm plugs
  • Supplies 10/100 Mbps data alongside power over Ethernet
  • Works instantly with no configuration required
  • Includes two splitters for multiple non-PoE IP cameras

Two-pack PoE splitters for 5 V devices

This two-pack supplies 5 V DC at up to 2.4 A to non-PoE equipment such as IP cameras, drawing 44–56 V from a compliant switch or injector. Each unit delivers a maximum of 12 watts through either a 3.5 mm × 1.35 mm or 5.5 mm × 2.1 mm barrel plug while passing 10/100 Mbps Ethernet data. No configuration is required, making installation straightforward where mains power is unavailable.

Replacing local power adapters for 10/100 Mbps gear

The splitters replace individual wall-wart supplies for devices that accept 5 V DC and a 10/100 Mbps network connection. The upgrade is worthwhile when running new AC circuits is impractical and the existing infrastructure provides IEEE 802.3 af power. They do not support gigabit Ethernet devices, so faster links require a different solution.

12-watt headroom for cameras and similar loads

Each splitter comfortably powers typical 5 V IP cameras and comparable accessories within the 12-watt limit. Headroom runs out when a device draws more than 2.4 A or requires gigabit throughput, as the Ethernet path is limited to 100 Mbps. The two-pack covers two endpoints from a single PoE source.

Highlights

  • Powers 5 V devices from 48 V PoE with 2.4 A output
  • Delivers 12 W max through 3.5 mm and 5.5 mm plugs
  • Supplies 10/100 Mbps data alongside power over Ethernet
  • Works instantly with no configuration required
  • Includes two splitters for multiple non-PoE IP cameras

Specifications

TypeAccessories

Questions about this item

What DC plug sizes does the splitter output for 5 V 2.4 A power?

The splitter provides two fixed output plugs: 3.5 mm × 1.35 mm and 5.5 mm × 2.1 mm, both delivering 5 V at up to 2.4 A (12 W max).

Which PoE standard must the switch or injector support for the splitter to work?

The unit requires an IEEE 802.3af source supplying 44–56 V DC; connect the Ethernet cable from the PoE port to the splitter’s input jack, then link the data-out port to the device.

How long is the manufacturer’s warranty on the splitter?

KINGARD covers the splitter with a 2-year warranty and offers unlimited technical support for the product’s lifetime.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.