We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four blue polyester tie-down straps with steel S-hooks

Kinedyne

Kinedyne 711087 Blue 1200 lb 10 ft Tie-Down Strap 4-Pack

SKU CH-0XKM-7171S

Four 10 ft polyester tie-down straps with steel S-hooks, each rated for a 400 lb working load limit and 1,200 lb breaking strength

  • TypeRope and Hardware
  • ColorBlue
  • Color MappingBlue
  • Secure loads with 1200 lb breaking strength
  • 400 lb working load limit for safe tie-downs
  • 10 ft length reaches across wide cargo
  • Polyester webbing resists weather and abrasion
  • Four straps in one pack for multiple tie points

Cargo securement kit for flat-bed loads

This four-pack of Kinedyne 711087 tie-down straps is built for securing cargo on flat beds. Each strap measures 10 ft long and 1 in wide with a working load limit of 400 lb and a breaking strength of 1,200 lb. The set suits haulers who need multiple anchor points for equipment, motorcycles or pallets.

Polyester webbing with steel S-hook ends

The blue polyester webbing resists weathering and abrasion during daily tie-down cycles. Steel S-hooks on each end clip quickly to stake pockets, D-rings or rub rails without extra hardware. The integrated ratchet mechanism allows precise tension adjustment so loads stay firm over rough roads.

Replaces worn rope or single-strap sets

Upgrading from frayed rope or a single strap eliminates weak points that can snap under shifting weight. The jump is worth it when you regularly secure heavier items that demand a 400 lb working load limit per strap and want the redundancy of four matched units.

Highlights

  • Secure loads with 1200 lb breaking strength
  • 400 lb working load limit for safe tie-downs
  • 10 ft length reaches across wide cargo
  • Polyester webbing resists weather and abrasion
  • Four straps in one pack for multiple tie points

Specifications

BrandKINEDYNE
TypeRope and Hardware
ColorBlue
Color MappingBlue

Questions about this item

What working load limit does the WSTDA-rated ratchet system enforce on each strap?

Each strap has a working load limit of 400 lb, which is the maximum load the WSTDA-compliant ratchet and polyester webbing are designed to secure during normal use.

What anchor points are required for the 1-inch wide S-hook ends on these 10 ft straps?

The steel S-hooks need a hole, rail or cleat with at least a 1-inch clear opening so the hook throat can fully seat without side loading.

How do you thread the ratchet correctly so the strap locks instead of slipping?

Feed the free end through the centre slot of the closed ratchet drum, pull slack tight, then pump the handle until the pawl clicks — never wrap the webbing around the drum before closing the handle.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.