Kinedyne
Kinedyne 573020GRA 30 ft 2 in ratchet tie-down 3335 lb WLL
30 ft polyester ratchet strap with flat hooks, 3,335 lb working load limit and 10,000 lb breaking strength
- TypeWheelbarrows & Carts
- 30 ft length reaches across wide loads
- 3,335 lb working load limit secures heavy cargo
- 10,000 lb breaking strength provides strong safety margin
- Flat hooks anchor quickly to tie-down points
- Polyester webbing resists stretch and weather damage
30 ft 2 in ratchet tie-down
This Kinedyne 573020GRA ratchet tie-down provides a 30 ft length and 2 in width for securing heavy cargo. The polyester webbing and zinc/carbon steel flat hooks deliver a 3335 lb working load limit and 10,000 lb breaking strength. It suits transport professionals and DIY users needing reliable load restraint.
Replaces worn straps and lower-capacity tie-downs
Upgrade when existing straps show fraying, damaged ratchets, or insufficient working load limits for the load. The jump is worth it when securing equipment or materials that demand the 3335 lb WLL and 10,000 lb breaking strength. WSTDA compliance confirms the rating methodology.
Handles heavy equipment.
The 3335 lb working load limit comfortably secures dense loads within that threshold. Headroom extends to the 10,000 lb breaking strength for sudden shock loads during transit. It runs out when cargo weight exceeds the WLL or when anchor points cannot accept flat hooks.
Highlights
- 30 ft length reaches across wide loads
- 3,335 lb working load limit secures heavy cargo
- 10,000 lb breaking strength provides strong safety margin
- Flat hooks anchor quickly to tie-down points
- Polyester webbing resists stretch and weather damage
Specifications
| Brand | KINEDYNE |
|---|---|
| Type | Wheelbarrows & Carts |
Questions about this item
What flat-hook size fits the 2 in strap on the 573020GRA?
The strap is 2 in wide and ends with a flat hook sized for that width; match the hook to a 2 in anchor slot or rail.
How do I thread the 30 ft webbing through the ratchet without jamming?
Feed the webbing from underneath the spool, pull slack tight by hand, then crank the handle — the common error is feeding from the top side.
When should I replace the 3335 lb WLL polyester tie-down?
Retire it if the gold webbing shows cuts, abrasion, UV fading, or if the zinc/carbon steel flat hook is bent or corroded.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
