Kinedyne
Kinedyne 512720PAKGRA Tie-Down Strap Ratchet 27ft x 2in 3335lb Gold
27 ft polyester tie-down strap with a wide-handle ratchet and flat hooks, rated for a 3,335 lb working load limit and 10,000 lb breaking strength
- 3,335 lb working load limit backed by 10,000 lb breaking strength
- 27 ft polyester strap with 18 in fixed end for versatile reach
- 804 wide-handle ratchet and 1015 flat hooks enable quick, secure tensioning
- Gold-coloured webbing and zinc/carbon steel hardware resist corrosion
- Meets WSTDA standards and includes 6-month manufacturer warranty
Kinedyne 27ft Gold Ratchet Strap
The Kinedyne 512720PAKGRA is a 27-foot by 2-inch polyester tie-down strap with a gold finish. It uses an 804 wide-handle ratchet mechanism and includes 1015 flat hooks on both ends. The working load limit is 3,335 lb and the breaking strength is 10,000 lb.
Cargo Securement for Medium Loads
This strap suits operators securing pallets, equipment or vehicles where a 3,335 lb working load limit is sufficient. The 18-inch fixed end and flat hooks require compatible anchor points. It is not for buyers who need a higher working load limit, a different hook style such as chain anchors, or a shorter overall length for tight spaces.
3,335 lb Working Load with 10,000 lb Break Strength
The assembly comfortably handles loads up to 3,335 lb in normal use, providing a 3:1 safety factor to the 10,000 lb breaking strength. Headroom decreases if the strap is knotted, wrapped around sharp edges without protection, or used beyond the rated working load limit. The 6-month manufacturer warranty covers defects in materials and workmanship.
Highlights
- 3,335 lb working load limit backed by 10,000 lb breaking strength
- 27 ft polyester strap with 18 in fixed end for versatile reach
- 804 wide-handle ratchet and 1015 flat hooks enable quick, secure tensioning
- Gold-coloured webbing and zinc/carbon steel hardware resist corrosion
- Meets WSTDA standards and includes 6-month manufacturer warranty
Specifications
| Brand | KINEDYNE |
|---|
Questions about this item
What anchor points do I need on my trailer or truck bed for the 1015 flat hooks to latch onto?
The 1015 flat hooks require a flat, load-rated anchor such as a stake-pocket plate, E-track fitting or welded D-ring that can accept a 2 in wide hook throat and handle the 3,335 lb working load limit.
Can I pair this 2 in wide polyester strap with my existing 1 in ratchet straps for the same load?
Mixing 2 in and 1 in straps on one load is not recommended because the 3,335 lb working load limit and 10,000 lb breaking strength of this strap will not match the lower ratings of 1 in hardware, creating an uneven load share.
How do I confirm the 804 wide-handle ratchet is tensioning correctly after I tighten the strap?
The ratchet pawl should click positively into each tooth, the handle must lock flat against the barrel without spring-back, and the 18 in fixed end should show no slack when the working load limit of 3,335 lb is approached.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
