We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gold dichromate steel transport chain 16 ft grade 70 with grab hooks

Kinedyne

Kinedyne 10038-16BXGRA Transport Chain 16 ft 3/8 in Grade 70 6600 lb

SKU CH-H3P1-MXN28

Grade 70 steel transport chain with grab hooks, 16 ft long, 3/8 in thick, rated for 6600 lb working load limit

  • Rated for 6600 lb with Grade 70 strength
  • 16 ft length covers wide load spans
  • Gold dichromate finish resists corrosion on steel
  • Grab hooks factory-installed for quick attachment
  • NACM compliant for transport chain standards

16 ft Grade 70 Transport Chain

Kinedyne 10038-16BXGRA is a 16 ft length of 3/8 in Grade 70 steel transport chain with a rated capacity of 6,600 lb. It features a gold dichromate finish and comes with grab hooks installed, meeting NACM standards for cargo securement.

For cargo securement, not overhead lifting

This chain suits drivers and fleets tying down heavy loads on flatbeds or trailers where Grade 70 strength is required. It is not for buyers who need a chain rated for overhead lifting, as the working lifting limit is explicitly not for lifting applications.

6,600 lb rated capacity decides fit

The single specification that determines whether this is the right part is the 6,600 lb rated capacity. If your tie-down points or load weight demand a different working load limit, this chain will not match the requirement.

Highlights

  • Rated for 6600 lb with Grade 70 strength
  • 16 ft length covers wide load spans
  • Gold dichromate finish resists corrosion on steel
  • Grab hooks factory-installed for quick attachment
  • NACM compliant for transport chain standards

Specifications

BrandKINEDYNE

Questions about this item

Will the 3/8 in grab hooks clear a standard 3/8 in chain binder slot?

The hooks are sized for 3/8 in Grade 70 chain and fit NACM-standard binder slots, so they slide in without forcing.

What is the correct way to seat the grab hooks so the 6600 lb rating holds?

Back the hook fully into the chain link until the latch clicks, then pull tight — leaving the latch open or the hook half-seated drops the working limit.

How often should the gold dichromate finish be inspected for corrosion before the chain is retired?

Check each link and hook before every use; replace the chain once the coating is worn through to bare steel or any link shows elongation.

More in Lifting, Pulling & Conveying

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.