Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00931958BTC
In stock
Killark
Killark Y-1 IMC Elbow 1/2 in Threaded Aluminum Polished Gray Conduit
Threaded aluminium elbow joins two 1/2 in IMC conduit runs in hazardous locations
- TypeCable Management & Conduit
- Hazardous-location rated for Class I, II, III divisions
- Powder-coated aluminum resists corrosion in harsh environments
- Female-to-female 1/2 in FNPT ends simplify conduit connections
- Compact 2 7/8 in length fits tight installation spaces
- Lightweight at .27 lb eases handling and mounting
Hazardous-Location Elbow for IMC Conduit
The Killark Y-1 is a capped elbow designed to join two lengths of 1/2-inch IMC or threaded rigid metal conduit in hazardous areas. It carries Class I Division 1 and 2, Groups C and D ratings plus Class II Division 1 and 2, Groups E, F, G and Class III Division 1 and 2 approval. The fitting is made from aluminium with a powder-coated grey finish.
Powder-Coated Aluminium with Female Threaded Ends
Both ends are 1/2-inch FNPT threaded hubs, allowing direct connection to conduit without separate couplings. The powder coating resists corrosion in damp or chemical environments while the aluminium body keeps weight low at 0.27 lb. Overall dimensions are 2 7/8 inches long, 3 inches high and 2 inches wide for tight routing.
Replaces Standard Elbows in Classified Zones
Use this fitting when a standard conduit elbow lacks the hazardous-location certification required by the electrical code. The jump is worth it whenever the installation falls under Class I, II or III Division ratings and a compact, female-to-female turn is needed. Orders of 75 or more ship free.
Highlights
- Hazardous-location rated for Class I, II, III divisions
- Powder-coated aluminum resists corrosion in harsh environments
- Female-to-female 1/2 in FNPT ends simplify conduit connections
- Compact 2 7/8 in length fits tight installation spaces
- Lightweight at .27 lb eases handling and mounting
Specifications
| Brand | HUBBELL KILLARK |
|---|---|
| Type | Cable Management & Conduit |
Questions about this item
What conduit types and thread size does the 1/2 in female NPT capped elbow accept?
It fits 1/2 in IMC and threaded rigid metal conduit with matching female NPT threads on both ends.
What are the overall length, height and width of the aluminum elbow?
Overall length is 2 7/8 in, height is 3 in and width is 2 in, with a weight of 0.27 lb.
How is the hazardous-location elbow installed and what step is often missed?
Thread each end onto the conduit and tighten with a wrench; the step often missed is applying listed sealing compound to maintain the Class I Division 1 rating.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
