We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray industrial pin-and-sleeve connector, straight body, flip-up screw-on cap, corrosion-resistant powder-coated aluminum

Killark

Killark VPR3465 Pin & Sleeve Connector 30A 4P 3W 600VAC/250VDC

SKU CH-VPJK-1WWK9

A 30 A pin-and-sleeve connector rated 600 V AC and 250 V DC for cables from .55 in to 1.2 in

  • Color/FinishGray
  • Color MappingGray
  • TypeLight Switch
  • 30 A current rating handles heavy industrial loads
  • 600 V AC and 250 V DC rating covers wide voltage range
  • Copper-free aluminium housing with epoxy powder coat resists corrosion
  • Accepts cable diameters from .55 in to 1.2 in for flexible installation
  • Flip-up screw-on cap protects contacts when disconnected

Killark VPR3465 Pin & Sleeve Connector

The Killark VPR3465 is a straight-orientation pin and sleeve connector rated for 30 A at 600 V AC and 250 V DC. Its gray copper-free aluminum housing carries an electrostatically applied epoxy powder finish for corrosion resistance. The connector accepts cables from .55 in to 1.2 in diameter and includes a flip-up and screw-on cap. It is suited for industrial power distribution where a grounded three-wire, four-pole connection is required.

Industrial electricians needing 30 A three-phase

This connector suits installers who need a grounded Style 2 grounding arrangement with four poles and three wires in a corrosion-resistant housing. It is not for applications that require a switch-rated device or a different grounding style. Buyers who need higher current ratings or alternative voltage classes should look at other series. The straight orientation also means it will not fit angled panel cut-outs.

30 A capacity with cable range .55 in to 1.2 in

The connector comfortably handles continuous loads up to its 30 A rating across 600 V AC and 250 V DC systems. Headroom exists for standard industrial cable sizes within the stated diameter range. It runs out when the load exceeds 30 A or when cable diameters fall outside the .55 in to 1.2 in window, requiring a different connector body or adapter.

Highlights

  • 30 A current rating handles heavy industrial loads
  • 600 V AC and 250 V DC rating covers wide voltage range
  • Copper-free aluminium housing with epoxy powder coat resists corrosion
  • Accepts cable diameters from .55 in to 1.2 in for flexible installation
  • Flip-up screw-on cap protects contacts when disconnected

Specifications

BrandHUBBELL
Color/FinishGray
Color MappingGray
TypeLight Switch

Questions about this item

What cable diameter range must I already have for the VPR3465 connector to fit?

The connector accepts cables from 0.55 in to 1.2 in outer diameter, so your cable must fall within that range.

Will the 30 A, 600 V AC rating of the VPR3465 work with my existing 30 A, 600 V AC pin-and-sleeve inlet?

Yes, matching 30 A and 600 V AC ratings mean the connector can mate with a compatible 30 A, 600 V AC inlet of the same pin-and-sleeve configuration.

How can I confirm the VPR3465 is making proper contact after wiring?

Verify the flip-up and screw-on cap is fully secured and that the connector seats firmly without gaps, indicating the pins are fully engaged.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.