We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray pin-and-sleeve plug, straight orientation, 4.063 in face diameter, copper-free aluminum housing

Killark

Killark VP204513 Pin & Sleeve Plug 200A 4P 4W 600VAC/250VDC

SKU CH-MNW7-KTJ2N

A 200 A, four-pole pin-and-sleeve plug rated 600 V AC and 250 V DC for hazardous locations

  • Color MappingGray
  • TypeWiring Devices
  • 200 A current capacity for heavy-duty power distribution
  • 600 V AC and 250 V DC dual voltage rating suits industrial systems
  • Class I Division 1/2 Groups A–D rating for hazardous locations
  • Copper-free aluminium housing with gray finish resists corrosion
  • 4-pole, 4-wire screw-terminal design ensures secure straight connections

Industrial Power Connection

The Killark VP204513 pin-and-sleeve plug delivers a 200 A rating for three-phase circuits at 600 V AC or 250 V DC. It suits heavy-duty industrial equipment that demands a grounded, straight-orientation connection in hazardous Class I Division 1 and 2 locations.

Thermal and Electrical Behaviour

Copper-free aluminium housing resists corrosion while maintaining structural integrity under continuous 200 A loads. Screw-terminal wire connections ensure stable contact resistance, limiting heat rise during normal operation without active cooling.

Hazardous-Location Compliance

The plug meets Class I Division 1 and 2 requirements for Groups A, B, C and D, allowing use where flammable gases or vapours may exist. Grounding Style 1 and a 4.063 in face diameter provide reliable mechanical and electrical mating with matching receptacles.

Highlights

  • 200 A current capacity for heavy-duty power distribution
  • 600 V AC and 250 V DC dual voltage rating suits industrial systems
  • Class I Division 1/2 Groups A–D rating for hazardous locations
  • Copper-free aluminium housing with gray finish resists corrosion
  • 4-pole, 4-wire screw-terminal design ensures secure straight connections

Specifications

BrandHUBBELL KILLARK
Color MappingGray
TypeWiring Devices

Questions about this item

How do I wire the screw terminals on the 200 A 4-pole plug?

Strip each conductor to the length recommended for 200 A screw terminals, insert fully into the four terminal chambers, and torque the screws to the manufacturer’s specified value so no copper strands remain exposed.

What part of the VP204513 plug wears out first and when should I replace it?

The copper-free aluminum housing and gray sleeve should be inspected for corrosion or tracking after each major shutdown; replace the plug if the screw terminals show pitting or the 4.063 in face diameter is deformed.

What thermal or current limit appears first during continuous 200 A three-phase loading?

The 200 A rating at 600 V AC or 250 V DC is the design limit; sustained operation at full load will hit the connector’s temperature rise ceiling before any voltage derating applies.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.