We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Industrial copper-free aluminum straight blade plug, unfinished, NEMA 6-15P

Killark

Killark UGP-15232QWWW straight blade plug 250 V 60 Hz 15 A 2 hp

SKU CH-0E16-AXY1J

A 15 A, 250 V AC straight-blade plug rated for 2 hp motors, built from copper-free aluminium with NEMA 6-15P configuration and NEMA 3, 7, 9 enclosure ratings

  • Rated for 250 V AC 60 Hz industrial power
  • 15 A capacity supports 2 hp motor loads
  • Copper-free aluminium body resists corrosion in harsh environments
  • NEMA 6-15P configuration ensures correct mating with matching receptacles
  • NEMA 3, 7, 9 rating suits hazardous and outdoor locations

Straight Blade Plug 250 V 15 A

This straight blade plug operates at 250 V AC and 60 Hz with a 15 A current rating and 2 hp motor rating. It uses a NEMA 6-15P configuration with three wires and two poles. The copper-free aluminum construction meets NEMA ratings 3, 7, and 9 for hazardous locations. It suits industrial equipment needing a durable, grounded connection.

Simple wiring with three conductors

Installation requires terminating three wires to the two-pole terminal block inside the unfinished copper-free aluminum body. The straightforward NEMA 6-15P layout reduces wiring errors, but the unfinished surface demands clean contact preparation to prevent oxidation. No special tools are needed beyond standard wire strippers and a screwdriver for the terminal screws.

Steady 15 A load handling

Under sustained load the plug maintains its 15 A rating at 250 V AC without derating for the 2 hp motor duty. The copper-free aluminum housing dissipates heat adequately for continuous industrial use within the NEMA 3, 7, and 9 environmental limits. Performance stays consistent during extended operation rather than only in short bursts.

Highlights

  • Rated for 250 V AC 60 Hz industrial power
  • 15 A capacity supports 2 hp motor loads
  • Copper-free aluminium body resists corrosion in harsh environments
  • NEMA 6-15P configuration ensures correct mating with matching receptacles
  • NEMA 3, 7, 9 rating suits hazardous and outdoor locations

Specifications

BrandKILLARK

Questions about this item

How can I confirm the 15 A 250 V AC 60 Hz plug is working correctly after wiring?

Verify the NEMA 6-15P blade orientation matches the receptacle, ensure all three wires are secured to the correct terminals, then apply power and check for 250 V AC across the hot poles with a multimeter while the connected load runs within the 2 hp rating.

What components are included with the UGP-15232QWWW and what must be sourced separately?

The package contains the straight-blade plug body made of copper-free aluminum with an unfinished surface; you must supply the 3-wire cable, appropriate strain relief, and any conduit or enclosure required for NEMA 3, 7, 9 environments.

Which NEMA configuration should I select for a 15 A 250 V single-phase motor circuit?

Choose the NEMA 6-15P version, which provides two poles and three wires rated 15 A at 250 V AC 60 Hz and supports up to 2 hp — matching the UGP-15232QWWW specifications exactly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.