We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver electroplated steel conduit plug, two-inch male thread, one-inch depth

Killark

Killark PLUG6 Recessed Conduit Plug 2 in .81 lb

SKU CH-XTW3-CVQSC

Seals a 2-inch conduit hub in hazardous locations with electroplated steel construction rated for Class I, II, III divisions and zones

  • TypeConduit Fittings
  • Size (in.)2"
  • Color/FinishSilver
  • Hazardous-location rated for Class I, II, III divisions
  • Recessed 2 in MNPT plug seals conduit openings
  • Electroplated steel resists corrosion in harsh environments
  • Male-to-male thread design fits hub or taped hole
  • Weighs .81 lb for easy handling and install

Application & Fit

The Killark PLUG6 is a 2-inch recessed conduit plug designed for hazardous-location electrical systems. It provides a male-to-male threaded seal for 2-inch trade-size conduit hubs or tapped holes. The fitting carries Class I Division 1 and 2, Class II Division 1 and 2, and Class III Division 1 and 2 ratings across multiple gas and dust groups. It is not intended for non-hazardous general-purpose conduit runs or for trade sizes other than 2 inches.

Construction & Weight

The body is made from electroplated steel with a silver finish for corrosion resistance in harsh environments. Overall dimensions are 1 inch in length, 1 inch in height and 2 1/2 inches in width. The unit weighs .81 lb. No thermal, acoustic or electrical power-draw specifications apply to this passive sealing component.

Included Hardware

The product ships as a single blank plug with no additional gaskets, locknuts, thread sealant or installation tools. The electroplated finish is the only surface treatment provided. No software, firmware or configuration utilities are associated with this mechanical fitting.

Highlights

  • Hazardous-location rated for Class I, II, III divisions
  • Recessed 2 in MNPT plug seals conduit openings
  • Electroplated steel resists corrosion in harsh environments
  • Male-to-male thread design fits hub or taped hole
  • Weighs .81 lb for easy handling and install

Specifications

TypeConduit Fittings
BrandHUBBELL KILLARK
Size (in.)2"
Color/FinishSilver

Questions about this item

How do I install the PLUG6 into a 2-inch threaded hub, and what step is often missed?

Thread the male NPT end into the hub until the recessed face sits flush. The step often missed is applying PTFE tape or pipe-thread sealant to the threads before tightening.

Will the electroplated finish need recoating or replacement in a hazardous-location installation?

The electroplated steel resists corrosion under normal service; inspect periodically for coating damage or rust, and replace the plug if the finish is compromised or threads are worn.

What is the first limit reached when the PLUG6 is used continuously in a Class I Division 1 area?

The plug carries no current, so heat is not a limit; the first limit is mechanical — thread galling or seal degradation from repeated removal and re-installation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.