We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Killark PCC150 parallel conduit clamp 1-1/2 inch malleable iron finish

Killark

Killark PCC150 Parallel Conduit Clamp 1-1/2 in

SKU CH-ZZX1-J1HVJ

Secures 1-1/2 inch conduit runs with UL-listed malleable iron construction

  • TypeCable Management & Conduit
  • UL Listed parallel clamp secures conduit runs
  • Malleable iron body resists mechanical stress
  • Fits 1-1/2 in EMT, IMC and RMC
  • Parallel design aligns multiple conduits cleanly
  • HUBBELL KILLARK brand backs industrial reliability

Product Identity

The Killark PCC150 is a parallel conduit clamp designed for electrical installations. It secures EMT, IMC and RMC raceways in a parallel configuration. The clamp is built from malleable iron for mechanical strength. It is intended for electricians and contractors running 1-1/2 inch conduit.

Thermals Noise Power

This passive mechanical component generates no heat and produces no audible noise during operation. It draws zero electrical power and requires no external supply. The malleable iron body dissipates ambient temperature naturally. Performance is unaffected by thermal cycling in standard environments.

Deciding Specification

The clamp is UL Listed, confirming compliance with relevant safety standards for conduit support. It accepts 1-1/2 inch trade-size raceways across EMT, IMC and RMC types. This single rating determines whether the part matches the conduit on site. Orders of $75 or more qualify for free shipping from the supplier.

Highlights

  • UL Listed parallel clamp secures conduit runs
  • Malleable iron body resists mechanical stress
  • Fits 1-1/2 in EMT, IMC and RMC
  • Parallel design aligns multiple conduits cleanly
  • HUBBELL KILLARK brand backs industrial reliability

Specifications

BrandHUBBELL KILLARK
TypeCable Management & Conduit

Questions about this item

How do I install the PCC150 clamp and what is the common mistake?

Mount the malleable iron body around the 1-1/2 in conduit, then tighten the U-bolt evenly so both sides grip the pipe. The step most installers miss is checking that the conduit is fully seated before final torque.

What maintenance or replacement will the PCC150 need later?

Inspect the clamp after vibration or thermal cycles; retighten the U-bolt if it has loosened and replace the unit if the malleable iron shows cracks or corrosion.

What limit appears first under sustained mechanical load?

The malleable iron body will yield or fracture before the UL-listed rating is exceeded, so deformation of the clamp is the first indicator of overload.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.