We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray powder-coated aluminum LL conduit outlet body, 15 in long, 6 5/8 in wide, 4 1/2 in high, 90-degree threaded hubs

Killark

Killark OLL-6 Conduit Outlet Body, Aluminum, Trade Size 2 in

SKU CH-BG9Y-ZVR21

Aluminium conduit outlet body with a 90-degree LL turn, 70 cu in capacity and powder-coated finish for IMC and RMC installations

  • TypeCable Management & Conduit
  • Aluminium body resists corrosion in harsh environments
  • LL body style enables 90-degree conduit routing
  • 70 cu in capacity accommodates multiple conductors
  • Powder-coated finish protects against wear and chemicals
  • Suitable for hazardous locations with IMC and RMC conduit

Conduit outlet body LL style

This conduit outlet body provides a 90-degree turn for 2-inch trade-size conduit runs. The flat-back, powder-coated aluminum housing suits IMC and RMC installations. It is rated for hazardous locations and matches compatible cover OL-60.

Thermals noise and power draw

As a passive electrical fitting, the outlet body generates no heat, noise or power draw during normal operation. The aluminum construction dissipates ambient warmth without active cooling. No electrical consumption occurs because the component carries conductors only.

Upgrades from straight couplings

The LL body replaces a straight coupling when a 90-degree directional change is required in the same trade size. The jump is worth it when conduit routing must turn sharply without exceeding the 70 cubic-inch capacity limit. It does not suit runs needing larger hub sizes or different bend angles.

Highlights

  • Aluminium body resists corrosion in harsh environments
  • LL body style enables 90-degree conduit routing
  • 70 cu in capacity accommodates multiple conductors
  • Powder-coated finish protects against wear and chemicals
  • Suitable for hazardous locations with IMC and RMC conduit

Specifications

BrandHUBBELL KILLARK
TypeCable Management & Conduit

Questions about this item

How do I install the OLL-6 outlet body onto 2 in threaded IMC or RMC conduit, and what step is commonly missed?

Thread the 2 in hub onto the conduit until the flat back seats fully, then tighten to eliminate gaps; the step often missed is confirming the 90-degree LL orientation before final torque.

What maintenance will the powder-coated aluminum body and compatible OL-60 cover need over time?

Inspect the gray powder coat annually for chips or corrosion, clean threads with a wire brush, and replace the OL-60 cover gasket if it hardens or cracks to maintain the hazardous-location seal.

What limit appears first when pulling conductors through the 70 cu in body during sustained use?

The 70 cubic-inch capacity governs maximum conductor fill; exceeding it makes wire pulling difficult and violates fill calculations before heat or mechanical stress becomes an issue.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.