We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray iron LL conduit outlet body with threaded hubs

Killark

Killark OLL-1M LL Conduit Outlet Body 1/2 in Gray Iron

SKU CH-XWGE-3RW3S

Gray iron LL conduit outlet body with a 90-degree threaded hub for 1/2 in IMC or RMC runs

  • TypeCable Management & Conduit
  • Size (in.)1/2"
  • Color/FinishGray
  • Gray powder-coated iron resists corrosion
  • 90-degree LL body routes conduit around corners
  • 1/2-inch threaded hub fits IMC and RMC
  • Four-cubic-inch capacity accepts required conductors
  • Flat back mounts flush on hazardous-location surfaces

Killark OLL-1M LL Conduit Outlet

This Killark OLL-1M is a gray iron conduit outlet body built for 1/2 inch trade size raceways. It provides a 90 degree directional change for threaded IMC or RMC installations. The LL body style suits pulls where the conduit run turns left relative to the cover opening. It is rated for hazardous locations.

Practical limits of the 1/2 inch trade size

The 1/2 inch hub accommodates only conductors and fill volumes permitted for that trade size. Body capacity is 4 cubic inches, so wire combinations must stay within that limit. The flat back and powder coated finish suit surface mounting, but the iron material adds weight compared to aluminum alternatives. Threaded connections require compatible conduit and fittings.

Installation notes and common issues

The outlet body accepts the OL-10M cover, sold separately, which must be ordered to complete the enclosure. Threaded hubs demand clean, undamaged threads on both conduit and fitting to seal properly in hazardous areas. Over-tightening can crack the iron casting. Verify the LL orientation matches the pull direction before tightening, as re-work risks thread damage.

Highlights

  • Gray powder-coated iron resists corrosion
  • 90-degree LL body routes conduit around corners
  • 1/2-inch threaded hub fits IMC and RMC
  • Four-cubic-inch capacity accepts required conductors
  • Flat back mounts flush on hazardous-location surfaces

Specifications

TypeCable Management & Conduit
BrandHUBBELL KILLARK
Size (in.)1/2"
Color/FinishGray

Questions about this item

Should I pick the LL body style or a different style for my conduit run?

Choose the LL style when you need a 90-degree turn with the outlet on the left side; other styles such as LB, LR or T place the opening in different positions, so match the style to your layout.

What does the 4 cu in body capacity mean when I am pulling wires?

The 4 cubic-inch capacity limits the number and size of conductors you can install; consult NEC fill tables for 1/2 in trade size conduit to stay within the allowed fill percentage.

Which conduit types does the 1/2 in threaded hub accept?

The 1/2 in threaded hub is compatible with IMC and RMC conduit, providing a secure mechanical connection for those raceway types.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.