We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray aluminum LL conduit outlet body, 90-degree threaded hub

Killark

Killark OLL-1 LL conduit outlet body 1/2 in gray

SKU CH-9JEW-EWTWB

A 1/2 in threaded LL conduit outlet body in gray aluminum with 90 degree connection orientation and 4 cu in capacity for IMC and RMC conduit

  • TypeTools - Electrician Tools
  • Size (in.)1/2"
  • Color/FinishGray
  • LL body routes wires 90 degrees in tight corners
  • Copper-free aluminium resists corrosion in harsh environments
  • Powder-coated gray finish protects against weather and chemicals
  • Rated for hazardous locations with IMC and RMC conduit
  • 4 cu in capacity fits standard 1/2 in fittings

1/2-Inch LL Conduit Outlet Body

The Killark OLL-1 is a 1/2-inch LL conduit outlet body designed for 90-degree directional changes in IMC and RMC raceway systems. Its copper-free aluminum construction and powder-coated gray finish provide corrosion resistance in harsh environments. The flat back design allows secure mounting against flat surfaces. It is rated for hazardous locations.

Indoor and outdoor raceway installations

Electricians running rigid or intermediate metal conduit in industrial or commercial settings will find this body matches the 1/2-inch trade size and LL turning radius required by their layout. The 4 cubic inch capacity suits standard splicing or pulling needs. Installers needing a different turning direction such as LR, T, or C styles, or those requiring a larger hub size, must select a different body configuration.

LL body style with 1/2-inch hub

The LL designation defines the 90-degree connection orientation with the opening on the left side when viewed from the front, which determines how the conduit run turns. The 1/2-inch threaded hub size must match the trade size of the IMC or RMC being used. Verifying both the body style and hub size against the project drawings is the single step that confirms this is the correct fitting.

Highlights

  • LL body routes wires 90 degrees in tight corners
  • Copper-free aluminium resists corrosion in harsh environments
  • Powder-coated gray finish protects against weather and chemicals
  • Rated for hazardous locations with IMC and RMC conduit
  • 4 cu in capacity fits standard 1/2 in fittings

Specifications

TypeTools - Electrician Tools
BrandHUBBELL KILLARK
Size (in.)1/2"
Color/FinishGray

Questions about this item

Will the OL-10 cover need replacing if the powder-coat finish wears off?

The powder-coated aluminum body resists corrosion, so the compatible OL-10 cover typically lasts the life of the installation without replacement.

What limits continuous use in a hazardous location?

The 4 cu in body capacity and 1/2 in hub size set the maximum conductor fill; exceeding NEC fill tables is the practical limit.

Does the aluminum body run hot when conduit carries full load all day?

Aluminum dissipates heat well; the conduit temperature follows the conductors inside, not the outlet body itself.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.