Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.0094068BTC
In stock
Killark
Killark OLB-2CG Conduit Outlet Body Aluminum LB
Aluminium conduit outlet body with cover, ¾ in hub, LB style, 90-degree turn, 7 cu in capacity, powder-coated grey, includes gasket, hazardous-location rated
- TypeCable Management & Conduit
- Aluminum construction resists corrosion
- Powder-coated gray finish adds durability
- LB body style enables 90-degree conduit turns
- Includes cover and gasket for sealed installation
- Rated for hazardous locations and IMC/RMC use
Conduit Outlet Body LB Style
This Killark OLB-2CG conduit outlet body provides a 90-degree threaded connection for 3/4-inch trade size conduit. The aluminum body includes a cover and gasket for a complete installation. It suits IMC and RMC systems in standard and hazardous locations.
Powder Coated Aluminum Limits
The flat-back body offers 7 cubic inches of internal capacity for wire fill. Threaded hubs accept only 3/4-inch trade size conduit, so larger raceways cannot connect. The powder-coated gray finish resists corrosion but does not replace a listed seal in wet or classified areas.
Cover Included Simplifies Mounting
The supplied OL-20 cover and gasket reduce the parts a technician must source separately. Mis-threading the 3/4-inch hubs or omitting the gasket are the common errors that compromise the hazardous-location rating. Verify conduit alignment before final tightening.
Highlights
- Aluminum construction resists corrosion
- Powder-coated gray finish adds durability
- LB body style enables 90-degree conduit turns
- Includes cover and gasket for sealed installation
- Rated for hazardous locations and IMC/RMC use
Specifications
| Brand | HUBBELL KILLARK |
|---|---|
| Type | Cable Management & Conduit |
Questions about this item
Should I choose the LB style or another body style for a 90-degree turn?
The LB style provides a 90-degree connection orientation with a flat back, suited for pulling conductors around a corner in conduit runs.
What does the 7 cu in body capacity mean when I install conductors?
It indicates the internal volume available for conductor fill, allowing you to calculate the maximum number and size of wires permitted by code.
Does the 3/4 in threaded hub accept standard IMC and RMC conduit?
Yes, the 3/4 in threaded hub is compatible with both IMC and RMC conduit of the same trade size.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
