We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray iron LB conduit outlet body, powder-coated, 90-degree threaded hub

Killark

Killark OLB-1M Conduit Outlet Body LB 1/2 in Gray

SKU CH-NSP9-Z72DH

LB conduit outlet body redirects cable runs 90 degrees with a 1/2 inch threaded hub and four cubic inches of wiring space

  • TypeCable Management & Conduit
  • Size (in.)1/2"
  • Color/FinishGray
  • LB body routes cables at 90 degrees around corners
  • Powder-coated iron resists corrosion in harsh environments
  • Threaded 1/2 in hub fits IMC and RMC conduit
  • Rated for Class I Division 2 hazardous locations
  • Flat back mounts flush to surfaces for neat installs

Conduit Outlet Body LB 1/2 In

The Killark OLB-1M is a conduit outlet body designed for electrical raceway systems. It provides a 90-degree change in conduit direction for pulling and splicing conductors. The unit suits industrial and hazardous-location wiring where code-compliant access points are required.

Iron Construction With Powder-Coated Finish

The body is made from iron with a gray powder-coated finish for corrosion resistance. Threaded hubs accept 1/2-inch IMC or RMC conduit directly. Flat-back mounting allows secure attachment to surfaces in wet or corrosive environments.

Compatible Cover OL-10M Included

The matching OL-10M cover seals the opening to maintain the enclosure rating. Four cubic inches of internal volume give room for conductor splices or bends. The assembly is rated for Class I Division 2 and Class I Zone 2 hazardous locations.

Highlights

  • LB body routes cables at 90 degrees around corners
  • Powder-coated iron resists corrosion in harsh environments
  • Threaded 1/2 in hub fits IMC and RMC conduit
  • Rated for Class I Division 2 hazardous locations
  • Flat back mounts flush to surfaces for neat installs

Specifications

TypeCable Management & Conduit
BrandHUBBELL KILLARK
Size (in.)1/2"
Color/FinishGray

Questions about this item

What hub size and thread standard does the LB body accept?

The body has a 1/2 in threaded hub that matches standard NPT conduit threads.

What are the overall dimensions and mounting footprint of the outlet body?

Overall width 2 in, height 3 in, length 5 in with a flat back for surface mounting.

How do you install the cover and what is the common mistake?

Use the compatible OL-10M cover, align the gasket, and torque the screws evenly; the frequent error is over-tightening which can warp the cover.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.