We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red LED flashing warning light in rugged housing

Killark

Killark NVSLCFG25R LED Flashing Red Warning Light

SKU CH-B11C-RZ1E0

LED flashing red warning light rated IP66 and NEMA 3, 4, 4X with 70.8 candela output and 50,000-hour lamp life

  • TypeLED, Flashing
  • ColorRed
  • Flashing red LED delivers 420 microflashes per minute for high visibility
  • 8 candela output ensures the warning is seen at distance
  • 50,000 hour lamp life reduces replacement frequency
  • IP66 and NEMA 4X ratings protect against dust, water and corrosion
  • Operates on 120/240V AC drawing only 0.04A for efficient installation

Hazardous-Location LED Warning Light

The Killark NVSLCFG25R is a red flashing LED beacon rated IP66 and NEMA 3, 4, 4X for use in hazardous or harsh environments. It operates on 120/240V AC and draws only 0.04A, making it suitable for permanent installation on industrial machinery, process vessels or outdoor structures where reliable visual signalling is required.

Sustained Operation in Extreme Temperatures

The integral inverted-cone Lexan lens and glass-filled polyester housing are rated for continuous service from -40 to 104 degrees F. LED technology delivers a 50,000-hour lamp life with consistent 70.8 candela output, so the flash rate of 420 microflashes per minute remains stable without the lumen depreciation or frequent relamping associated with older light sources.

120/240V AC Power Compatibility

The unit accepts either 120V or 240V AC without rewiring, so the single specification that decides fit is the available supply voltage at the mounting point. Installations limited to low-voltage DC circuits or battery-backed systems cannot use this beacon.

Highlights

  • Flashing red LED delivers 420 microflashes per minute for high visibility
  • 8 candela output ensures the warning is seen at distance
  • 50,000 hour lamp life reduces replacement frequency
  • IP66 and NEMA 4X ratings protect against dust, water and corrosion
  • Operates on 120/240V AC drawing only 0.04A for efficient installation

Specifications

BrandKillark
ModelNVSLCFG25R
TypeLED, Flashing
ColorRed

Questions about this item

How much heat does the 0.04A AC draw generate during continuous 24-hour operation?

The light draws only 0.04 amps at 120/240V AC, so heat output remains minimal even when flashing continuously at 420 microflashes per minute.

What electrical supply must already be in place for the 120/240V AC connection?

A standard 120-volt or 240-volt AC circuit is required; the fixture connects directly to mains wiring with no separate driver or low-voltage transformer needed.

Will the Lexan lens and glass-filled polyester housing withstand the same -40 to 104°F range as my existing NEMA 4X enclosures?

Yes, the integral inverted-cone Lexan lens and glass-filled polyester housing are rated for -40 to 104°F and carry IP66 and NEMA 3, 4, 4X ratings matching those enclosures.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.