We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray iron conduit outlet body, LR style, 90-degree threaded connection, powder-coated finish

Killark

Killark LR57 Conduit Outlet Body Iron 1 1/2in 90 Degrees 26 cu in

SKU CH-X06Z-94QGT

Iron conduit outlet body with 90-degree LR turn, 26 cu in capacity for 1 1/2 in threaded IMC or RMC runs

  • TypeCable Management & Conduit
  • 90-degree turn simplifies tight conduit routing
  • 26 cu in capacity fits larger wire bundles
  • Iron construction with powder coat resists corrosion
  • Threaded hubs accept IMC and RMC conduit
  • Compatible with 570-series covers for secure closure

Conduit Outlet Body 1 1/2in LR Style

This iron conduit outlet body provides a 90-degree directional change for 1 1/2 inch trade size IMC or RMC conduit runs. The LR body style creates a left-to-rear pull point suited for industrial and commercial wiring installations. Its 26 cubic inch capacity accommodates conductor fill requirements for the specified trade size. Gray powder-coated Duraloy 7 finish resists corrosion in harsh environments.

Thermals Noise and Power Draw

As a passive iron fitting this outlet body generates no operational noise and draws no electrical power. The powder-coated Duraloy 7 surface dissipates ambient heat normally without active cooling. Threaded hub connections maintain a secure mechanical bond that does not loosen from vibration. The flat back design allows flush mounting against surfaces for stable thermal contact.

Replaces and Upgrades From

This LR57 body replaces damaged or outdated outlet bodies in existing 1 1/2 inch conduit systems requiring a 90-degree left-to-rear pull point. It upgrades installations needing the 26 cubic inch capacity for code-compliant conductor fill. The jump is worth it when the compatible 570 series covers are required for the enclosure. Buyers who need a different body style or trade size cannot use this fitting.

Highlights

  • 90-degree turn simplifies tight conduit routing
  • 26 cu in capacity fits larger wire bundles
  • Iron construction with powder coat resists corrosion
  • Threaded hubs accept IMC and RMC conduit
  • Compatible with 570-series covers for secure closure

Specifications

BrandHUBBELL KILLARK
TypeCable Management & Conduit

Questions about this item

How do I install the Killark LR57 conduit outlet body on 1 1/2 in threaded IMC or RMC, and what step is often missed?

Thread the body onto the conduit using the 1 1/2 in hub, orient the 90-degree LR bend as needed, then secure the compatible cover (570 series) with its gasket to maintain the enclosure rating — the gasket step is frequently skipped.

What maintenance or replacement will the Killark LR57 conduit outlet body need over time?

Inspect the powder-coated iron finish for corrosion, verify the 570-series cover gasket remains pliable, and replace the cover or gasket if sealing degrades; the iron body itself typically lasts the installation life.

What limit appears first on the Killark LR57 conduit outlet body during sustained use?

The 26 cu in body capacity limits the number and size of conductors you can pull through; exceeding fill rules causes heat buildup and code violations before the iron or coating fails.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.