Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.0094039BTC
In stock
Killark
Killark GUML-2WW IMC Union 3/4 in Threaded Aluminum Plain Gray
Threaded aluminium conduit union connects IMC and RMC at 90 degrees with 3/4 inch female-to-male ends
- TypeCable Management & Conduit
- Connects IMC conduit to boxes at 90 degrees
- Female-to-male threaded ends simplify hazardous-location wiring
- Aluminum body resists corrosion in harsh environments
- Plain gray finish meets industrial aesthetic needs
- Weighs only 0.21 lb for easy handling
3/4 in IMC conduit union
The HUBBELL KILLARK GUML-2WW joins 3/4 in IMC or threaded RMC conduit to a box at a 90 degree angle. Its female to male NPT threads allow a secure connection in hazardous-location fittings. The aluminium body with a plain gray finish suits industrial and commercial electrical installations. Electricians and maintenance crews use it to change direction in rigid metal conduit runs.
Thermal noise and power profile
The aluminium construction dissipates heat from conductors without active cooling, so the fitting runs silently and draws no power. No moving parts or electronics mean there is no acoustic signature or electrical load to manage. The plain finish adds no insulating layer that would alter thermal performance. It simply provides a reliable mechanical and electrical path.
3/4 in trade size and 90 degree turn
The union fits 3/4 in trade size conduit and creates a 90 degree bend between a female threaded hub and a male threaded nipple. Overall length is 1 5/8 in with a 2 in by 2 in profile, and the part weighs .21 lb. Select this fitting only when the conduit system uses 3/4 in IMC or threaded RMC and a right-angle box connection is required.
Highlights
- Connects IMC conduit to boxes at 90 degrees
- Female-to-male threaded ends simplify hazardous-location wiring
- Aluminum body resists corrosion in harsh environments
- Plain gray finish meets industrial aesthetic needs
- Weighs only 0.21 lb for easy handling
Specifications
| Brand | HUBBELL KILLARK |
|---|---|
| Type | Cable Management & Conduit |
Questions about this item
How do I install the 3/4 in FNPT x MNPT union without cross-threading the aluminium threads?
Start both threads by hand until they seat fully, then tighten with a strap wrench on the flats; aluminium strips easily if forced with pipe wrenches.
What maintenance or replacement will the aluminium union need later?
Inspect the plain finish annually for oxidation or galling; replace the union if threads show deformation or the 90-degree bend restricts wire pulling.
What limit appears first when the union runs at its 90-degree bend under sustained load?
The 0.21 lb aluminium body heats faster than steel, so thermal expansion at the threaded joint becomes the limiting factor during continuous operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
