We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray aluminum conduit outlet body, L-shaped 90-degree turn, 19 cubic inch capacity, powder-coated finish, threaded 1/2 inch hub

Killark

Killark GECLT-1 Conduit Outlet Body 1/2 in 19 cu in 90 Degrees

SKU CH-DX11-JCM5Q

Aluminium conduit outlet body with a 90-degree threaded hub and 19 cubic-inch capacity for RMC installations

  • TypeCable Management & Conduit
  • Aluminium construction resists corrosion in harsh environments
  • Powder-coated grey finish protects against weather and wear
  • 90-degree L-style body routes conduit around tight corners
  • 19 cu in capacity provides ample space for wire splices
  • Threaded 1/2 in hub ensures secure RMC connection

Conduit outlet body 19 cu in

The Killark GECLT-1 is an aluminium conduit outlet body designed for rigid metal conduit systems. It provides a 90-degree directional change with a 19 cu in internal capacity for wire splicing or pulling. The trade size is 1/2 in and the hub is threaded for secure connection. A compatible cover is included with the unit.

Thermals noise and power draw

As a passive metal fitting, this outlet body generates no heat, produces no noise and draws no electrical power. The powder-coated aluminium construction resists corrosion in standard environments. It simply houses and protects conductors within the conduit run. No active cooling or power supply is required for operation.

Build fit and clearance

The L-style body accepts 1/2 in rigid metal conduit and uses a flat back for surface mounting. It works with compatible covers such as 2GOU, 4GOU, GECBCB, GECBCM and GECEY. Builders who need a straight pull or a different hub orientation cannot use this 90-degree L body. Installations requiring a larger wire fill capacity than 19 cu in will need a different body size.

Highlights

  • Aluminium construction resists corrosion in harsh environments
  • Powder-coated grey finish protects against weather and wear
  • 90-degree L-style body routes conduit around tight corners
  • 19 cu in capacity provides ample space for wire splices
  • Threaded 1/2 in hub ensures secure RMC connection

Specifications

TypeCable Management & Conduit
BrandHUBBELL KILLARK

Questions about this item

How is the GECLT-1 outlet body installed, and what step is often missed with the threaded hub?

Thread the 1/2 in hub onto rigid metal conduit, then secure the included cover to the flat back; the step often missed is tightening the cover screws to maintain the 19 cu in capacity rating.

What maintenance or replacement will the GECLT-1 need over time?

Inspect the powder-coated aluminum for corrosion and verify the cover gasket seals; replace the cover with a compatible 2GOU, 4GOU, GECBCB, GECBCM or GECEY if the seal fails.

What limit appears first on the GECLT-1 during sustained use in a 90 degree bend?

The 19 cu in body capacity limits the number and size of conductors you can pull through the 90 degree turn before exceeding fill regulations.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.