We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey powder-coated iron 90-degree conduit elbow with female threads

Killark

Killark FF-90-1MWW IMC 90 Deg Elbow 1/2 in Threaded Iron Powder

SKU CH-D6QV-1JM4F

A 90-degree threaded elbow joins two half-inch IMC conduit runs in hazardous locations

  • TypeCable Management & Conduit
  • 90-degree turn simplifies tight conduit routing
  • Powder-coated iron resists corrosion in harsh environments
  • Rated for Class I Division 1 hazardous locations
  • Female-to-female threads connect two conduit runs directly
  • Compact 2-inch profile fits confined junction boxes

HUBBELL KILLARK IMC Elbow 90 Deg 1/2 in

This HUBBELL KILLARK conduit elbow provides a 90-degree turn for IMC and threaded rigid conduit systems. The fitting uses 1/2 in female NPT threads on both ends to join two conduit runs in hazardous locations. Iron construction with a powder-coated finish resists corrosion in demanding environments. It carries Class I Division 1 and 2, Class II Division 1 and 2, and Class III Division 1 and 2 ratings for Groups C, D, E, F, G.

Verify Conduit Type and Thread Compatibility

Confirm your existing conduit run uses IMC or threaded rigid metal conduit with a 1/2 in trade size before ordering. The fitting requires female NPT threads on both conduit ends to accept this elbow. Check that the hazardous location classification of your installation matches the listed Class and Group ratings. Ensure the 2 in overall length and height fit within the available space in the enclosure or raceway.

Completes a Hazardous-Location Conduit Run

The elbow connects two horizontal or vertical conduit sections while maintaining the hazardous-location seal. Iron material and powder coating withstand exposure to moisture, chemicals and physical impact. The 0.34 lb weight adds minimal load to the support structure. It frees the installer from fabricating custom bends and ensures code-compliant radius for wire pulling. Orders of 75 or more qualify for free shipping from the supplier.

Highlights

  • 90-degree turn simplifies tight conduit routing
  • Powder-coated iron resists corrosion in harsh environments
  • Rated for Class I Division 1 hazardous locations
  • Female-to-female threads connect two conduit runs directly
  • Compact 2-inch profile fits confined junction boxes

Specifications

BrandHUBBELL KILLARK
TypeCable Management & Conduit

Questions about this item

Does the Killark FF-90-1MWW elbow ship with gaskets or locknuts, or must they be ordered separately?

The elbow is supplied as a single 1/2 in FNPT x 1/2 in FNPT fitting; gaskets, locknuts and any sealing compound are not included and must be purchased separately.

When should I choose this 1/2 in trade-size elbow instead of a larger trade size?

Select this elbow when the conduit run uses 1/2 in IMC or threaded RMC; it matches that exact trade size and hazardous-location rating.

What does the Class I Division 1 rating mean for an installation using this elbow?

It certifies the fitting for use in areas where flammable gases or vapours may exist under normal conditions, Groups C and D, when installed with approved IMC or threaded RMC.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.