We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Iron 45-degree conduit elbow, powder-coated, 3/4 inch threaded ends

Killark

Killark FF-45-2MWW IMC 45 Deg Elbow 3/4 in Threaded Iron Powder Coated

SKU CH-GPG1-NNAYK

A 45-degree threaded iron elbow connects 3/4-inch IMC conduit runs with a powder-coated finish for hazardous locations

  • TypeCable Management & Conduit
  • Directs conduit runs at a 45° angle
  • Powder-coated iron resists corrosion in harsh environments
  • Rated for Class I Division 1 hazardous locations
  • Female-to-female threads join two conduit sections
  • Compact 2 11/16 in length fits tight spaces

Conduit Elbow for IMC Systems

This 45-degree elbow connects two sections of 3/4-inch IMC or threaded rigid conduit in hazardous locations. It carries a Class I Division 1 and 2 rating for Groups C and D, plus Class II Division 1 and 2 for Groups E, F, and G, and Class III. The powder-coated iron body resists corrosion in tough industrial environments.

Threaded Interface and Dimensional Limits

The fitting uses female NPT threads on both ends, accepting only 3/4-inch trade-size conduit. Overall length measures 2 11/16 inches, with a height of 3 inches and a width of 2 inches. These fixed dimensions determine the minimum bending radius and the space required inside enclosures or junction boxes.

Installation Compatibility Checks

Verify that your conduit run uses IMC or threaded rigid metal conduit in the 3/4-inch trade size. Confirm the hazardous-area classification matches the Class I, II, and III ratings listed. Ensure the powder-coated iron material suits the chemical environment and that the 0.48 lb weight is supported by the mounting structure.

Highlights

  • Directs conduit runs at a 45° angle
  • Powder-coated iron resists corrosion in harsh environments
  • Rated for Class I Division 1 hazardous locations
  • Female-to-female threads join two conduit sections
  • Compact 2 11/16 in length fits tight spaces

Specifications

BrandHUBBELL KILLARK
TypeCable Management & Conduit

Questions about this item

Which trade size should I select for a 3/4 inch IMC run?

The fitting is made for 3/4 inch trade size IMC or threaded rigid conduit, so choose the matching 3/4 inch version.

What does the 45 degree angle mean when installed in a conduit system?

It changes the conduit direction by 45 degrees while keeping a 2 11/16 inch overall length and 3 inch height.

What conduit standard does the female NPT thread follow and what does it limit?

The 3/4 inch FNPT ends mate with IMC or threaded rigid conduit and are rated for Class I Division 1 and 2, Groups C, D hazardous locations.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.