We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aluminium powder-coated 45-degree conduit elbow with female threads

Killark

Killark FF-45-1WW IMC 45 Deg Elbow 1/2 in Threaded Aluminum Powder Coated Conduit

SKU CH-FA8P-E1RHV

A 45-degree threaded aluminium elbow joins two half-inch IMC conduit runs in hazardous locations

  • TypeCable Management & Conduit
  • 45° turn routes conduit smoothly in tight spaces
  • Female-to-female 1/2 in threads join IMC or threaded RMC directly
  • Powder-coated aluminium resists corrosion in harsh environments
  • Rated for Class I Div 1&2 Groups C,D and Class II Div 1&2 Groups E,F,G hazardous locations
  • Lightweight 0.15 lb fitting eases overhead installation

45 Degree IMC Elbow

The Killark FF-45-1WW is a 45 degree threaded elbow designed for 1/2 inch IMC conduit runs. It connects two female-threaded conduit ends in hazardous-location electrical installations. The aluminum body with powder-coated finish resists corrosion in demanding industrial environments.

Threaded Female-to-Female Install

Installation requires threading the elbow onto 1/2 inch IMC or threaded RMC conduit with standard pipe threads. The 2 3/8 inch overall length and 3 inch height fit within typical conduit layouts. Cross-threading or insufficient thread engagement can compromise the hazardous-location seal.

Hazardous Location Capacity

Rated for Class I Division 1 and 2 Groups C and D, Class II Division 1 and 2 Groups E, F, G, and Class III hazardous areas. The 1/2 inch trade size handles standard conduit fill for this diameter. Installations requiring larger conduit trade sizes or different bend angles cannot use this fitting.

Highlights

  • 45° turn routes conduit smoothly in tight spaces
  • Female-to-female 1/2 in threads join IMC or threaded RMC directly
  • Powder-coated aluminium resists corrosion in harsh environments
  • Rated for Class I Div 1&2 Groups C,D and Class II Div 1&2 Groups E,F,G hazardous locations
  • Lightweight 0.15 lb fitting eases overhead installation

Specifications

BrandHUBBELL KILLARK
TypeCable Management & Conduit

Questions about this item

How can I verify the elbow is seated correctly after threading it onto IMC conduit?

Confirm the 45-degree bend aligns with the planned route, both female threads are fully engaged, and the powder-coated aluminium shows no cross-threading or gaps.

What comes with the FF-45-1WW elbow and what must I supply separately?

The fitting itself is supplied; you must provide 1/2 in IMC or threaded RMC conduit, thread sealant if required, and any locknuts or bushings for the enclosure.

Which version should I choose for a Class I Division 1 hazardous location with 1/2 in IMC?

Select the FF-45-1WW model — it carries Class I Division 1 and 2, Groups C, D ratings and matches 1/2 in trade size IMC conduit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.