We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Killark 90 degree elbow conduit, 3/4 inch, aluminum powder coated finish

Killark

Killark BL-90-2WW 90° elbow conduit 3/4 in aluminum powder coated

SKU CH-7CRP-C2BWY

Threaded 90-degree elbow connects 3/4 in IMC conduit with powder-coated aluminum and hazardous-location rating

  • TypeCable Management & Conduit
  • 90° turn routes cable smoothly in tight spaces
  • Powder-coated aluminium resists corrosion in harsh environments
  • Female-to-male threads connect directly to 3/4 in IMC conduit
  • Rated for Class I, II and III hazardous locations
  • Lightweight 0.19 lb design simplifies overhead installation

Application fit

The Killark BL-90-2WW is a 90 degree threaded elbow for 3/4 inch IMC or rigid metal conduit. It suits electricians routing hazardous-location circuits where aluminium construction and powder coating are specified.

What the finish and rating change

Powder coating adds corrosion resistance while the aluminium body keeps weight at .19 lb. The fitting carries Class I Division 1 and 2 Groups C D, Class II Division 1 and 2 Groups E F G and Class III Division 1 and 2 ratings for use in classified areas.

Check before ordering

Verify that your conduit run uses 3/4 inch trade size IMC or threaded RMC with female to male thread orientation. Confirm the overall length of 2 5/8 in and 3 in height and width fit the available space in the enclosure or junction box.

Highlights

  • 90° turn routes cable smoothly in tight spaces
  • Powder-coated aluminium resists corrosion in harsh environments
  • Female-to-male threads connect directly to 3/4 in IMC conduit
  • Rated for Class I, II and III hazardous locations
  • Lightweight 0.19 lb design simplifies overhead installation

Specifications

BrandHUBBELL KILLARK
TypeCable Management & Conduit

Questions about this item

Does the powder-coated aluminium elbow need any re-coating or gasket replacement after long service in a hazardous area?

The factory powder coat and aluminium body are the only finishes; no scheduled re-coating or gasket is specified for the fitting itself.

What mechanical limit appears first when the elbow is subjected to continuous vibration and thermal cycling?

The threaded 3/4 in FNPT x MNPT joints and the aluminium material set the fatigue and creep limits under sustained movement.

How much heat does the aluminium elbow dissipate when installed in a sealed Class I Division 1 run all day?

Aluminium conducts heat from the conductors, and the 0.19 lb mass provides limited thermal mass; surface temperature follows the wire load and ambient conditions.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.