Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00931684BTC
In stock
Killark
Killark AN-5 Conduit Nipple 1-1/2 In Aluminum
Connects 1-1/2 inch IMC or threaded RMC conduit in hazardous locations with Class I, II, III Division ratings and male NPT ends
- TypeConduit Fittings
- Size (in.)1-1/2"
- Aluminium construction resists corrosion in harsh environments
- Male-to-male NPT threads join two conduit sections directly
- Rated for Class I Division 1 hazardous locations
- Compact 1 3/4 in length fits tight enclosures
- Lightweight at 0.21 lb reduces structural load
Conduit Nipple 1-1/2 Inch
The Killark AN-5 is a male-to-male aluminum conduit nipple built for hazardous locations. It connects 1-1/2 inch IMC or threaded RMC conduit runs in Class I, II and III Division 1 and 2 environments. Electricians and plant maintenance crews use it where flammable gases, vapors or combustible dusts are present.
Hazardous Location Rating Limits
The fitting carries ratings for Class I Groups A, B, C, D, Class II Groups E, F, G and Class III Division 1 and 2. It is not rated for applications outside these specific hazardous classifications. Installers must verify that the area classification matches these exact group and division designations before use.
Physical Capacity and Clearance
The nipple measures 1 3/4 inches overall length with a 1 25/32 inch height and width profile, weighing .21 lb. This compact size fits tight junction boxes and enclosures where longer nipples cannot be accommodated. Runs requiring greater spacing between boxes need a longer nipple or a coupling combination.
Highlights
- Aluminium construction resists corrosion in harsh environments
- Male-to-male NPT threads join two conduit sections directly
- Rated for Class I Division 1 hazardous locations
- Compact 1 3/4 in length fits tight enclosures
- Lightweight at 0.21 lb reduces structural load
Specifications
| Type | Conduit Fittings |
|---|---|
| Brand | HUBBELL KILLARK |
| Size (in.) | 1-1/2" |
Questions about this item
What size conduit nipple do I need for 1-1/2 inch trade size conduit?
The AN-5 nipple is made for 1-1/2 inch trade size IMC or threaded RMC conduit with male NPT threads on both ends.
How much space does the 1-3/4 inch overall length add to a conduit run?
The nipple measures 1-3/4 inches long and 1-25/32 inches wide, so it adds that much length between fittings in the run.
What hazardous location ratings does the aluminum conduit nipple carry?
It is rated for Class I Division 1 and 2 Groups A B C D, Class II Division 1 and 2 Groups E F G, and Class III Division 1 and 2.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
