Killark
Killark 3485 Pin & Sleeve Plug 30A 4P 3W 600VAC 250VDC
A 30 A pin-and-sleeve plug rated 600 V AC and 250 V DC with an octagonal grip, high-strength insulators and a Type 4X seal when mated
- Color MappingGray
- TypeWiring Devices
- Octagonal body provides sure grip during connection
- High-strength insulators deliver mechanical and dielectric protection
- Gripper-rib terminals clamp conductors securely in box
- Funneled entry guides stripped wires into terminals simultaneously
- Type 4X rating achieved when locked into VersaMate receptacle
Industrial pin-and-sleeve plug 30A 600VAC
The Killark 3485 is a 30-amp, four-pole, three-wire pin-and-sleeve plug rated for 600 volts AC and 250 volts DC. It suits industrial power-distribution tasks where a locking, weather-resistant connection is required. The octagonal body gives a firm grip during mating and unmating.
Verify voltage phase count and receptacle match
Confirm that your supply is a three-wire, four-pole system compatible with 600 VAC or 250 VDC operation. The mating receptacle must be a VersaMate type so that the locking ring can engage and achieve the Type 4X rating. Check that conductor sizes fit the box terminals with gripper ribs.
Octagonal grip and Type 4X sealing
The gray octagonal housing provides a sure grip even with gloved hands. Insulators deliver high mechanical and dielectric strength. Funneled conductor entries guide stripped wires into the Increased Safety terminals simultaneously. When fully seated in a VersaMate receptacle with the locking ring tightened, the assembly meets Type 4X protection and suits Type P marine cable.
Highlights
- Octagonal body provides sure grip during connection
- High-strength insulators deliver mechanical and dielectric protection
- Gripper-rib terminals clamp conductors securely in box
- Funneled entry guides stripped wires into terminals simultaneously
- Type 4X rating achieved when locked into VersaMate receptacle
Specifications
| Brand | HUBBELL-WIEGMANN |
|---|---|
| Color Mapping | Gray |
| Type | Wiring Devices |
Questions about this item
Does the 3485 plug come with the mating receptacle or must that be purchased separately?
The 3485 is the pin-and-sleeve plug only; the matching VersaMate receptacle and locking ring are sold separately.
The listing shows 30A, 4P, 3W, 600VAC and 250VDC — which of those ratings determines the right version for my circuit?
Choose the version that matches your circuit’s amperage, pole count, wire count and voltage; the 3485 is fixed at 30A, four poles, three wires, 600VAC and 250VDC.
What does the 600VAC rating mean once the 3485 is wired into a panel?
The 600VAC rating means the plug is approved for circuits up to 600 volts AC when fully inserted into a VersaMate receptacle with the locking ring tightened.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



