We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 10-inch car subwoofer with silver cone and rubber surround

KICKER

KICKER CVT10 CompVT 10-Inch Car Subwoofer 2 Ohm SVC

SKU CH-W5K9-D4Q75

A 10-inch slimline car subwoofer with a four-layer voice coil handling 180-375 watts RMS in sealed or ported enclosures

  • TypeSubwoofers
  • Slim 10.8 cm mounting depth fits tight enclosures
  • Four-layer voice coil handles 375 watts RMS power
  • 2 ohm SVC impedance matches mono amplifiers
  • 2 dB sensitivity produces loud output efficiently
  • Works in sealed boxes from 22.5 L or ported from 35.4 L

Compact 10-Inch Subwoofer for Tight Spaces

The KICKER CompVT 10-inch subwoofer uses a slimline design and four-layer voice coil to deliver strong bass from a shallow mounting depth of 4-1/4 inches. It handles 180 to 375 watts RMS and peaks at 750 watts, making it suited for vehicle owners who need serious output without sacrificing cargo room.

Ideal for Sealed or Ported Builds.

This driver suits installers building a sealed box between 0.8 and 3 cubic feet or a ported enclosure between 1.25 and 1.75 cubic feet. Buyers who plan to run the subwoofer in a free-air or infinite baffle configuration should look elsewhere, as the suspension and motor are optimised for enclosed alignments.

Handles Up to 375 Watts RMS in the Right Box

With 375 watts RMS the subwoofer reaches its thermal limits cleanly inside the recommended enclosure volumes. Beyond that power level or outside the specified box ranges, compression and mechanical stress increase quickly, so the usable headroom ends at the rated RMS ceiling.

Highlights

  • Slim 10.8 cm mounting depth fits tight enclosures
  • Four-layer voice coil handles 375 watts RMS power
  • 2 ohm SVC impedance matches mono amplifiers
  • 2 dB sensitivity produces loud output efficiently
  • Works in sealed boxes from 22.5 L or ported from 35.4 L

Specifications

TypeSubwoofers

Questions about this item

What amplifier power range works with this 2 Ohm SVC subwoofer?

The manufacturer recommends 180-375 watts RMS from the amplifier for this 2 Ohm single voice coil driver.

Can I keep my existing sealed box if it is 25 litres?

Yes, the sealed enclosure volume range is 22.5 to 85 litres, so a 25 litre box falls within the recommended limits.

How do I confirm the sub is performing correctly once installed?

Measure the DC resistance across the terminals; it should read approximately 2.675 Ohms for a healthy 2 Ohm SVC coil.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.