KHACHIMO
KHACHIMO LPT47 ATX 55W 5V5A 24V1.5A -12V0.7A 80 PLUS Gold
A 55 W ATX power supply with 80 PLUS Gold efficiency, zero-RPM fan mode and Modern Standby support for quiet, low-power sleep states
- TypeATX
- Fast wake-from-sleep with Modern Standby support
- 80 PLUS Gold efficiency cuts power draw and heat
- Fan stops completely at low loads for silent running
- Resonant LLC topology with DC-to-DC delivers clean, stable power
- 55 W ATX unit provides 5 V at 5 A, 24 V at 1.5 A, -12 V at .7 A
Target builds
The KHACHIMO LPT47 is an ATX power supply rated at 55W and certified 80 PLUS Gold. It delivers 5V at 5A, 24V at 1.5A and -12V at .7A using resonant LLC topology with DC-to-DC conversion. The unit suits compact or low-power systems that require modern standby support.
Upgrade path
This unit replaces older ATX supplies that lack modern standby compatibility or efficient low-load operation. The jump is worthwhile when a build needs fast wake-from-sleep times, reduced coil whine and a fan that stops completely at low and medium loads. It is not for systems requiring higher total wattage or additional PCIe power connectors.
Practical limits
The 55W ceiling restricts the supply to platforms with modest power draw. The fixed voltage rails of 5V, 24V and -12V limit compatibility with components that demand other voltages or higher current on these rails. Efficiency gains from the 80 PLUS Gold rating diminish as load approaches the maximum rated output.
Highlights
- Fast wake-from-sleep with Modern Standby support
- 80 PLUS Gold efficiency cuts power draw and heat
- Fan stops completely at low loads for silent running
- Resonant LLC topology with DC-to-DC delivers clean, stable power
- 55 W ATX unit provides 5 V at 5 A, 24 V at 1.5 A, -12 V at .7 A
Specifications
| Type | ATX |
|---|
Questions about this item
What ATX form-factor dimensions does the LPT47 require for mounting?
The LPT47 uses the standard ATX form factor, so it fits any case with an ATX power-supply bay and four rear mounting holes.
How do I enable the Zero RPM fan mode on this unit?
Zero RPM mode activates automatically at low and medium loads; no BIOS or software setting is required, just ensure the fan-control cable is connected to the motherboard header.
When should the internal fan be cleaned or replaced on the LPT47?
Because the fan stops under light loads, dust builds up more slowly; inspect the grill every 12 months and clean with compressed air, replacing the fan only if bearing noise appears.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



