Kfi
Kfi 101545 Polaris RS1 Winch Mount Bump conveying
Mounts a winch on the Polaris RS1 front bumper for recovery and utility pulling
- Designed for Polaris RS1 fitment
- KFI 101545 winch mount part number
- New condition ready for installation
- Winch mounting solution for RS1
- Bump-compatible bracket for secure attachment
KFI 101545 Polaris RS1 Winch Mount
The KFI 101545 is a dedicated winch mount bump designed for the Polaris RS1. It provides a secure mounting point for a winch on this specific side-by-side vehicle. Owners adding recovery equipment to their RS1 will use this bracket to integrate a winch with the factory front structure. It is not for other Polaris models or generic UTV applications.
Bracket integrates winch with factory front end
The mount positions the winch to align with the RS1 bumper geometry. It allows the winch fairlead and hook to function without interference from the vehicle bodywork. The bracket replaces or reinforces the original bumper structure to handle winch loads. No wiring, controllers or hydraulic components are included with this mounting hardware.
Bolt-on installation uses existing hardware points
Installation typically uses the factory mounting locations on the RS1 frame. Basic hand tools are sufficient for the mechanical fastening steps. Builders should verify bolt torque specifications from the winch manufacturer. Misalignment can occur if the bumper skin is not removed or trimmed correctly before fitting the mount.
Highlights
- Designed for Polaris RS1 fitment
- KFI 101545 winch mount part number
- New condition ready for installation
- Winch mounting solution for RS1
- Bump-compatible bracket for secure attachment
Specifications
| Brand | KFI |
|---|
Questions about this item
Will the 101545 mounting hardware need periodic retightening after hard pulls?
Grade-8 bolts and lock nuts are used throughout; they resist vibration loosening but should be inspected after the first few heavy winching sessions.
What part of the 101545 bumper reaches its limit first during a long, steady pull?
The winch motor thermal cut-out typically activates before the steel structure yields, stopping the pull until the motor cools.
How much heat does the 101545 winch generate when run continuously all day?
The motor housing becomes very hot during sustained operation; the built-in thermal breaker cycles power to prevent damage.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
