Kfi
Kfi 100700 Kawasaki Teryx winch mount conveying
Winch mount designed for Kawasaki Teryx models, enabling secure winch installation for pulling and recovery tasks
- Designed for Kawasaki Teryx winch installation
- Brand KFI ensures proven off-road reliability
- Model 100700 matches factory mounting points
- First listed July 23, 2022 for current fitment
- New condition guarantees full structural integrity
KFI 100700 Winch Mount
The KFI 100700 winch mount is built for Kawasaki Teryx owners who need a solid attachment point for a recovery winch. It bolts to the vehicle frame and provides the structural base required to pull or lift heavy loads during off-road recovery or utility work. The part is supplied new and ships directly from the manufacturer. It falls within the lifting, pulling and conveying hardware category for automotive use.
Upgrade from factory bumper
The factory front bumper on a Teryx is not designed to handle the forces generated by a powered winch. Installing this mount replaces that weak point with a dedicated steel structure that distributes pulling stress into the chassis rails. The jump is worth it when you plan to run a winch regularly for self-recovery, moving logs or assisting other vehicles, because the original bumper will bend or crack under those loads.
Capacity for typical off-road pulls
The mount handles the tension of common mid-size winches used on side-by-side vehicles during mud, rock or snow recovery. It holds firm when winching the Teryx itself up a steep incline or dragging a downed tree from a trail. It reaches its limit if you pair it with an oversized industrial winch or attempt pulls that exceed the chassis strength, as the mounting bolts and frame rails become the bottleneck rather than the bracket itself.
Highlights
- Designed for Kawasaki Teryx winch installation
- Brand KFI ensures proven off-road reliability
- Model 100700 matches factory mounting points
- First listed July 23, 2022 for current fitment
- New condition guarantees full structural integrity
Specifications
| Brand | KFI |
|---|
Questions about this item
What bolts or brackets does the KFI 100700 mount use to attach to the Kawasaki Teryx frame?
The KFI 100700 is designed to bolt directly to the factory mounting points on the Kawasaki Teryx chassis using the supplied hardware kit.
Which step do installers most often miss when fitting the KFI 100700 winch mount?
Many forget to torque the main frame bolts to the specified value after the winch is seated, leaving the mount loose under load.
What hardware on the KFI 100700 should be inspected or replaced after heavy winching seasons?
Check the Grade 8 mounting bolts and lock nuts for stretch or corrosion, and replace the fairlead rollers if the cable groove shows wear.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
