Kfi
Kfi 100560 Polaris Ranger Winch Mount conveying
Winch mount designed for Polaris Ranger utility vehicles to secure a winch
- Direct-fit mounting for Polaris Ranger winch installations
- KFI 100560 model engineered for specific vehicle compatibility
- New condition ensures full structural integrity out of box
- Brand KFI specialises in lifting, pulling and conveying hardware
- First listed by manufacturer on 23 July 2022
KFI 100560 Polaris Ranger Winch Mount
This new KFI winch mount is built specifically for the Polaris Ranger platform. It provides a secure attachment point for adding a winch to the vehicle. The part carries the manufacturer model number 100560 and was first listed by the brand in July 2022.
Suits Ranger owners adding a winch for recovery
The mount is designed for a single Polaris Ranger application and will not fit other side-by-side models or ATV brands. Builders who need a universal mounting plate or a kit for a different vehicle should look at other options.
Bolts to the Ranger chassis to accept a compatible
Installation uses the vehicle's existing mounting locations to integrate the winch into the front structure. The mount frees up the operator to add pulling capability without fabricating custom brackets or modifying the frame.
Highlights
- Direct-fit mounting for Polaris Ranger winch installations
- KFI 100560 model engineered for specific vehicle compatibility
- New condition ensures full structural integrity out of box
- Brand KFI specialises in lifting, pulling and conveying hardware
- First listed by manufacturer on 23 July 2022
Specifications
| Brand | KFI |
|---|
Questions about this item
Does the KFI 100560 Polaris Ranger Winch Mount require a specific winch model or bolt pattern to install?
The mount is designed for Polaris Ranger models and matches the factory winch mounting points; verify your Ranger’s year and sub-model to confirm the bolt pattern aligns before fitting.
Will this KFI 100560 mount interfere with the original brush guard or front bumper on my Ranger?
It bolts to the existing frame locations used by the stock bumper, so most factory brush guards can be reinstalled afterwards; check clearance with any aftermarket bumper tubes.
How can I confirm the KFI 100560 winch mount is seated correctly after installation?
All supplied bolts should be torqued to the values in the included instructions, the winch drum must rotate freely, and the fairlead should sit flush without binding the cable.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
