We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact industrial code reader with autofocus lens and red illumination LEDs

Keyence

Keyence SR-X100W 1360×1024 Autofocus Code Reader 2 in 1 accessory

SKU CH-6A6N-PZMRN MPN SR-X100W

A 1360×1024 CMOS autofocus code reader decodes 2D and 1D symbols from 50 to 1000 mm with high-intensity red and green illumination

  • High-resolution 1360×1024 CMOS sensor captures detailed codes
  • Autofocus handles 50 to 1000 mm reading distance automatically
  • High-intensity red and green LEDs illuminate and point at targets
  • Decodes extensive 2D and 1D symbologies including QR and DataMatrix
  • Bidirectional inputs and PhotoMOS outputs integrate with 30 VDC systems

Industrial 1360×1024 code reader

The Keyence SR-X100W is a CMOS-based autofocus code reader with a 1360×1024 pixel sensor. It reads 2D codes down to 0.060 mm and barcodes down to 0.082 mm at distances from 50 to 1000 mm. High-intensity red and green LEDs provide illumination and aiming.

Suited for traceability stations needing flexible

This unit fits lines that must handle both near and far symbols without manual refocus. Operations that require networked vision tools, colour imaging, or integrated lighting beyond the four red LEDs should evaluate other platforms.

Verify power and I/O before ordering

The reader accepts 15 to 30 VDC on two bidirectional inputs and drives three photo-MOS relay outputs rated at 30 VDC with 50 mA per channel or 100 mA total. Confirm your controller voltage and wiring match these limits.

Highlights

  • High-resolution 1360×1024 CMOS sensor captures detailed codes
  • Autofocus handles 50 to 1000 mm reading distance automatically
  • High-intensity red and green LEDs illuminate and point at targets
  • Decodes extensive 2D and 1D symbologies including QR and DataMatrix
  • Bidirectional inputs and PhotoMOS outputs integrate with 30 VDC systems

Specifications

No published specifications for this item yet.

Questions about this item

What voltage supply do I need for the reader’s two bidirectional inputs?

The inputs accept up to 30 VDC and require at least 15 VDC to register ON.

Can the three photo-MOS relay outputs drive the same 24 VDC PLC inputs I use today?

Yes, each output handles up to 50 mA at 30 VDC with 1 V residual voltage.

How do I verify the autofocus is reading codes at the rated distance after mounting?

Check that 2D codes as small as 0.060 mm and barcodes down to 0.082 mm decode across the 50 to 1000 mm range.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.