We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black Micro HDMI to HDMI cable, 6.6ft length, braided nylon jacket

Keyence

Keyence Micro HDMI to HDMI Adapter 6.6ft 48Gbps 8K@60Hz 4K@240Hz

SKU CH-XHN5-69CCJ

Micro HDMI to HDMI cable carries 8K at 60 Hz or 4K up to 240 Hz with 48 Gbps bandwidth and HDR support

  • Changer TypeHDMI Cables
  • 8K 60 Hz resolution for ultra-sharp video
  • 4K 240 Hz refresh rate for fluid motion
  • 48 Gbps bandwidth carries full 8K HDR signals
  • 6 ft length gives flexible device placement
  • Bi-directional Micro HDMI to HDMI connects cameras and displays

Universal Micro HDMI Adapter

The Keyence Micro HDMI to HDMI adapter connects cameras, mini PCs and tablets that use a Micro HDMI 2.1 port to standard HDMI displays. It supports 8K at 60 Hz and 4K at up to 240 Hz with a 48 Gbps bandwidth ceiling. The 6.6 ft length suits desktop setups and mobile rigs alike.

Signal Integrity and Build

Gold-plated contacts and double-layer braided shielding protect the 48 Gbps signal from electromagnetic interference during normal use. The nylon-braided jacket resists kinks and abrasion without adding stiffness. Passive construction means no external power is required and no fan noise is introduced.

Sustained High-Refresh Workloads

The cable maintains 4K 240 Hz and 2K 175 Hz output during extended gaming or capture sessions without signal dropouts. Bi-directional wiring allows the same adapter to drive a monitor from a Raspberry Pi 5 or to feed a capture card from a GoPro Hero. HDR metadata passes through continuously at full bandwidth.

Highlights

  • 8K 60 Hz resolution for ultra-sharp video
  • 4K 240 Hz refresh rate for fluid motion
  • 48 Gbps bandwidth carries full 8K HDR signals
  • 6 ft length gives flexible device placement
  • Bi-directional Micro HDMI to HDMI connects cameras and displays

Specifications

Changer TypeHDMI Cables

Questions about this item

How do I connect the Micro HDMI end to a Raspberry Pi 5 without stressing the port?

Align the Micro HDMI plug with the Raspberry Pi 5 port and push straight in until it seats; the 6.6ft cable length lets you route slack away from the board so the connector is not levered sideways.

Will the nylon-braided jacket or gold-plated contacts need any upkeep after months of use?

The double-layer fishnet nylon braid resists abrasion and the gold-plated contacts resist corrosion; no scheduled maintenance is required — just keep the ends clean and avoid sharp bends near the connectors.

At what point does the 48Gbps bandwidth limit the signal when driving an 8K@60Hz display?

The cable is rated for 48Gbps, which matches the maximum throughput of the HDMI 2.1 link used for 8K@60Hz HDR; sustained use at that resolution stays within the rated bandwidth ceiling.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.