We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact silver sensor head with front laser aperture and rear cable gland

Keyence

Keyence LJ-G030 surveillance security system

SKU CH-PPBH-J4VEM MPN LJ-G030

Laser displacement sensor with ±0.1% linearity, 3.8 ms sampling cycle, and 655 nm wavelength for 0 to 50 °C operation

  • High-precision 2D measurement with ±0.1% linearity
  • Fast 3.8 ms sampling cycle captures rapid changes
  • Reliable operation from 0 to 50 °C ambient
  • Stable performance at 35 to 85 % RH non-condensing
  • Visible 655 nm laser simplifies alignment and setup

Industrial Laser Displacement Sensor

The Keyence LJ-G030 is a 2D sensor head designed for precise height measurement in industrial environments. It uses a 655 nm laser to capture displacement data with a linearity of ±0.1 % of full scale. The unit operates on a 3.8 ms sampling cycle for consistent trigger intervals.

Suited for Automated Inspection Lines

This sensor suits production lines that require non-contact height profiling within a 0 to 50 °C temperature range. It is not intended for buyers who need integrated controller functions or wireless data transmission. The device also does not support operation in condensing humidity above 85 % RH.

Verify Mounting and Environmental Limits

Confirm that your installation can maintain ambient conditions between 32 and 122 °F with relative humidity from 35 to 85 %. Ensure the mounting geometry accommodates the sensor head form factor without exceeding the specified temperature envelope. Check that your control system can synchronise with the 3.8 ms trigger timing.

Highlights

  • High-precision 2D measurement with ±0.1% linearity
  • Fast 3.8 ms sampling cycle captures rapid changes
  • Reliable operation from 0 to 50 °C ambient
  • Stable performance at 35 to 85 % RH non-condensing
  • Visible 655 nm laser simplifies alignment and setup

Specifications

No published specifications for this item yet.

Questions about this item

What controller or amplifier unit is required to operate the LJ-G030 sensor head?

The LJ-G030 is a sensor head only and must be connected to a compatible Keyence controller, such as the LJ-G series controller, for power, signal processing, and output.

Can the LJ-G030 operate alongside older Keyence laser sensors on the same production line?

Yes, the LJ-G030 uses a 655 nm wavelength and standard analogue or digital interfaces, allowing integration with existing Keyence controllers and multi-sensor setups without interference.

How can I verify the LJ-G030 is measuring within its specified linearity after installation?

Place a calibrated reference target at the measurement centre distance and confirm the output deviation stays within ±0.1% of full scale across the sampling cycle.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.