Keyence
Keyence IL-600 CMOS Laser Sensor IP67 600mm 200-1000mm
CMOS laser sensor measures 200 to 1000 mm at 600 mm reference with IP67 enclosure and 50 µm repeatability
- IP67 enclosure withstands dust and water ingress
- 50 µm repeatability delivers precise measurements
- 200–1000 mm range covers diverse sensing tasks
- 33 ms sampling rate enables fast response
- Operates from −10 to +50 °C in harsh environments
CMOS Laser Sensor with IP67 Rating
The Keyence IL-600 is a CMOS multi-function analog laser sensor rated IP67 for harsh industrial environments. It provides a measurement range of 200 to 1000 mm with a reference distance of 600 mm. A selectable sampling rate of 0.33, 1, 2 or 5 ms supports different application speeds. Repeatability is specified at 50 µm.
Suited for Precise Displacement Tasks
This unit suits automated inspection, positioning and thickness measurement where analog output and high repeatability are required. The IP67 enclosure handles water jets and dust in pollution degree 3 areas. It operates from -10 to +50 °C and 35 to 85 % RH without condensation. Buyers needing digital network interfaces or built-in controller functions should look elsewhere.
Analog Output Decides Compatibility
The sensor delivers an analog signal rather than a fieldbus or IO-Link connection, so the host system must accept that interface. Verify that your PLC or DAQ module has a compatible analog input range and update rate. Without a matching analog input, the sensor cannot be used.
Highlights
- IP67 enclosure withstands dust and water ingress
- 50 µm repeatability delivers precise measurements
- 200–1000 mm range covers diverse sensing tasks
- 33 ms sampling rate enables fast response
- Operates from −10 to +50 °C in harsh environments
Specifications
No published specifications for this item yet.
Questions about this item
What mounting dimensions and enclosure rating does the IL-600 sensor need?
The sensor carries an IP67 enclosure rating and is designed for a 600 mm reference distance with a 200 to 1000 mm measurement range; allow clearance for the laser aperture and cable exit when planning the bracket.
How is the IL-600 installed and what step is commonly missed?
Mount the unit securely, connect the flying leads to power and the analog output, then set the sampling rate to 0.33, 1, 2 or 5 ms; the step often missed is verifying the 50 µm repeatability at the actual working distance before locking the fixture.
What ongoing maintenance will the IL-600 require?
Keep the front window clean so ambient light up to 5000 lux does not degrade performance; operate only within -10 to +50 °C and 35 to 85 % RH without condensation, and re-check alignment if the mounting shifts.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Goldendisk
Goldendisk IR Break Beam Sensor 5mm LED Counting Module Split Through-Beam Photoelectric Switch
$23.99
0.00028413BTC
In stock