We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Braided HDMI cable with straight connectors, 6.6ft length

Keyence

Keyence HDMI 2.1 cable 48Gbps 8K 60Hz 4K 144Hz 1440P braided eARC 6.6ft

SKU CH-ZT8K-BKMNA

An ultra-high-speed HDMI 2.1 cable certified for 48 Gbps bandwidth, supporting 8K at 60 Hz, 4K at 144 Hz, 1440p at 240 Hz, eARC audio and HDR10+ in a 6.6 ft braided design

  • Changer TypeHDMI Cables
  • Certified HDMI 2.1 cable verified by QR code scan
  • 48 Gbps bandwidth carries 8K at 60 Hz and 4K at 144 Hz
  • Double-layer braided jacket with ferrite beads prevents signal dropouts
  • eARC delivers Dolby Atmos and DTS:X to compatible sound systems
  • Dynamic HDR and 12-bit colour depth for richer contrast

Certified HDMI 2.1 Cable

This 6.6ft cable carries HDMI 2.1 certification and delivers 48Gbps bandwidth for 8K 60Hz and 4K 144Hz signals. It supports 1440P at 240Hz and 165Hz, plus HDR10+ and eARC audio return. The braided jacket uses double-layer fishnet winding over nylon for added durability.

Compatibility Check

Verify that your source and display both have HDMI 2.1 ports to use the full 48Gbps link. The cable is backward compatible with earlier HDMI versions, but higher refresh rates such as 4K 144Hz require host and panel support. Ensure your graphics card or console can output the desired resolution and refresh combination.

Build and Connectors

Ferrite magnetic beads on the copper cores suppress interference to prevent black screens and flickering. The upgraded braided exterior resists kinks and abrasion during routing behind furniture or through tight channels. Standard HDMI connectors fit existing ports without adapters, and the 6.6ft length suits typical living-room or desk setups.

Highlights

  • Certified HDMI 2.1 cable verified by QR code scan
  • 48 Gbps bandwidth carries 8K at 60 Hz and 4K at 144 Hz
  • Double-layer braided jacket with ferrite beads prevents signal dropouts
  • eARC delivers Dolby Atmos and DTS:X to compatible sound systems
  • Dynamic HDR and 12-bit colour depth for richer contrast

Specifications

Changer TypeHDMI Cables

Questions about this item

What comes with the Keyence HDMI 2.1 cable and is anything else needed?

The cable is a single 6.6ft braided HDMI 2.1 lead with 48Gbps bandwidth. No extra adapters or power supplies are required; plug it directly into HDMI 2.1 ports on both devices.

Which resolution and refresh-rate combination should I pick for my setup?

The cable supports 8K at 60Hz, 4K at 144Hz and 120Hz, 1440p at 240Hz and 165Hz, plus 5K at 120Hz and 90Hz. Choose the highest mode your source and display both list in their specifications.

What does the 48Gbps rating mean when the cable is installed?

It certifies the full HDMI 2.1 ultra-high-speed bandwidth, enabling 12-bit colour at 8K 60Hz or 4K 144Hz, plus eARC for Dolby Atmos and DTS:X, without compression or signal loss.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.