We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Keyence FD-Q10C clamp-on flow sensor main unit IP65 IP67 enclosure

Keyence

Keyence FD-Q10C clamp-on flow sensor 0.5–60 s response IP65/IP67

SKU CH-HTC6-VBT4Z

Clamp-on flow sensor with selectable response times from 0.5 to 60 seconds and IP65/IP67 enclosure rating

  • TypeSensors
  • Clamp-on installation avoids pipe cutting
  • Response time selectable from 0.5 s to 60 s
  • Repeatability tightens to ±0.35 % at 10 s setting
  • IP65/IP67 rating resists dust and water ingress
  • Operates with fluid temperatures up to 85 °C

Industrial clamp-on flow sensor

The Keyence FD-Q10C is a non-invasive flow sensor designed for process engineers who need to monitor liquid flow without cutting pipework. It clamps onto the outside of a pipe and measures flow rates with a display resolution selectable between 0.01, 0.1 and 1 L/min. The unit suits water-treatment, cooling-loop and general industrial applications where fluid contamination must be avoided.

Fits existing piping with IP65/IP67 sealing

Because the sensor mounts externally, it requires no process shutdown, welding or flange work during installation. The PPS, PES, PBT and stainless-steel wetted materials resist corrosion across a supported fluid temperature range of 0 to 85 °C. An enclosure rated IP65 and IP67 to IEC 60529 protects the electronics from dust and water jets in wash-down environments.

Replaces invasive turbine or mag-meter inserts

The clamp-on design eliminates pressure drop and leak paths associated with in-line sensors, making the jump worthwhile when system uptime or fluid purity are priorities. Response time is selectable from 0.5 s to 60 s, with repeatability tightening from ±2.0 % at the fastest setting to ±0.35 % at 10 s. It is not suited for gases, slurries or pipes where ultrasonic coupling cannot be achieved.

Highlights

  • Clamp-on installation avoids pipe cutting
  • Response time selectable from 0.5 s to 60 s
  • Repeatability tightens to ±0.35 % at 10 s setting
  • IP65/IP67 rating resists dust and water ingress
  • Operates with fluid temperatures up to 85 °C

Specifications

TypeSensors

Questions about this item

What is the fastest response time the FD-Q10C can be set to for detecting flow changes?

The sensor offers selectable response times of 0.5 s, 1.0 s, 2.5 s, 5 s, 10 s, 30 s and 60 s, with the quickest setting at 0.5 seconds.

How much heat can the clamp-on sensor handle on the pipe surface during continuous operation?

It supports fluid temperatures from 0 to 85 °C provided there is no freezing on the pipe surface, and the ambient range is -10 to +60 °C.

What pipe material specifications must already be in place for the FD-Q10C to mount correctly?

The sensor main unit uses PPS, PES, PBT, SUS303, SUS304 and SUSXM7 construction, so the pipe must be compatible with these clamp materials.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.