We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular digital panel meter with colour LCD, 13.9 by 4.8 by 7.8 cm

KETOTEK 4-in-1 DC Multimeter Panel 14-600V 20A Electrical System Tool

SKU CH-QT1J-MMZKJ

Measures DC voltage from 14.0 to 600.0 V, current up to 20 A, power to 12000 W and energy to 9999999 kWh on a colour LCD with built-in shunt

  • Features1*Multimeter, 1*Instruction manual, CE, Corded Electric, fal
  • Height13.9 L x 4.8 W x 7.8 H centimeters
  • Width13.9 L x 4.8 W x 7.8 H centimeters
  • Length13.9 L x 4.8 W x 7.8 H centimeters
  • Sports Team1 Piece
  • Measures voltage, current, power and energy simultaneously on a colour LCD
  • DC voltage range 14.0 to 600.0 V and current up to 20 A
  • Built-in shunt enables active power reading up to 12000 W
  • Cumulative energy counter stores up to 9999999 kWh with one-touch reset
  • Compact 13.9 × 4.8 × 7.8 cm flame-retardant ABS housing for indoor use

Multimeter Panel 14-600V 20A

This digital multimeter panel measures DC voltage from 14.0 to 600.0V and current up to 20A simultaneously. It displays active power up to 12000W and cumulative energy up to 9999999kWh on a full-view LCD screen. Designed for monitoring batteries, solar systems and electric bicycle generators in indoor environments.

Sustained Load Behaviour

The built-in shunt supports continuous current measurement up to 20A without external accessories. Energy accumulation persists through power cycles and can be reset with a single touch. Measurement accuracy is rated at 1% for stable long-term monitoring of volts, amps, watts and kilowatt-hours.

Pre-Installation Checks

Verify your system voltage stays within the 14.0 to 600.0V DC range and current does not exceed 20A to avoid damage. Confirm the 13.9 x 4.8 x 7.8 cm enclosure fits your panel cut-out and that the installation location is indoors only. Ensure wiring can accommodate the corded electric connection method.

Highlights

  • Measures voltage, current, power and energy simultaneously on a colour LCD
  • DC voltage range 14.0 to 600.0 V and current up to 20 A
  • Built-in shunt enables active power reading up to 12000 W
  • Cumulative energy counter stores up to 9999999 kWh with one-touch reset
  • Compact 13.9 × 4.8 × 7.8 cm flame-retardant ABS housing for indoor use

Specifications

BrandaFe Power
Features1*Multimeter, 1*Instruction manual, CE, Corded Electric, false
Height13.9 L x 4.8 W x 7.8 H centimeters
Width13.9 L x 4.8 W x 7.8 H centimeters
Length13.9 L x 4.8 W x 7.8 H centimeters
Sports Team1 Piece

Questions about this item

Does the panel draw noticeable power or generate heat when it monitors a 600 V 20 A circuit continuously?

The meter itself is powered from the measured circuit and its internal shunt handles up to 20 A with 1 % accuracy, so self-heating stays minimal during all-day use.

What wiring and voltage source must already be in place for the meter to function?

A DC supply between 14.0 V and 600.0 V with two conductors for the built-in shunt is required; no external shunt or separate auxiliary power is needed.

Will the 14 V minimum operating voltage work with a 12 V lead-acid battery that sags below 14 V under load?

The meter needs at least 14.0 V to operate, so a nominal 12 V battery that drops below that threshold will not keep the display active.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.