Keson Industries
Keson Industries SR18200 200 ft surveyor's rope tape measure
A 200 ft surveyor's rope tape measure with numbers graduated from the handle upward and 200 lbs tensile strength
- Length8.000
- Width8.000
- TypeMeasuring & Layout Tools
- 200 ft reach for long-distance site layout
- Graduations from handle upward simplify reading on the drag
- 200 lb tensile strength withstands rough surveying pulls
- No end hook prevents snagging when dragging through brush
- Feet-and-inches markings match common US survey practice
Surveyor's Rope Tape 200 ft
The Keson SR18200 is a 200-foot surveyor's rope tape built for rough outdoor measuring. It functions as a drag chain so crews can pull it across uneven ground without a hook on the end. Numbers graduate from the strap handle toward the tip. It suits surveyors and contractors who need long-range linear checks in the field.
200 ft length with 100 kg tensile strength
The rope extends 200 ft and withstands a tensile load of 100 kg or 200 lbs. That headroom handles normal dragging tension across dirt, gravel or grass. The limit appears if the line snags on sharp edges or is subjected to sudden shock loads beyond the rated strength. Graduations in feet and inches run the full length for direct reading.
No hook on the tape end
The design omits a terminal hook so the rope pulls freely as a drag chain. Buyers who need a hooked blade for latching onto studs, corners or stakes should choose a different style. The strap handle provides the only fixed reference point for starting each measurement.
Highlights
- 200 ft reach for long-distance site layout
- Graduations from handle upward simplify reading on the drag
- 200 lb tensile strength withstands rough surveying pulls
- No end hook prevents snagging when dragging through brush
- Feet-and-inches markings match common US survey practice
Specifications
| Brand | Keson Industries |
|---|---|
| Model | SR18200 |
| Length | 8.000 |
| Width | 8.000 |
| Type | Measuring & Layout Tools |
Questions about this item
Will the 200 ft Keson SR18200 rope tape lay flat alongside my existing 100 ft steel tape when I am checking long runs?
The rope tape is flexible and designed for rough drag-chain use, so it can be coiled or laid beside a steel tape without kinking; both measure in feet and inches for direct comparison.
How do I confirm the SR18200 is reading accurately after I unbox it?
Pull the rope taut against a known 10 ft or 100 ft reference mark; the graduations run from the strap handle upward, so the numbers should align exactly at each foot and inch increment.
Does the SR18200 come with a hook or stake, or do I need to buy one separately?
The tape has no hook on the end; the package includes only the 200 ft rope with strap handle, so you will need to supply your own stake, pin or corner anchor for solo measurements.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



