Keson Industries
Keson Industries NR18-200 200 ft Tape Measure 3/8 in Blade
A 200 ft long tape measure with a 3/8 in blade and manual rewind in an ABS open case
- Length15.500
- Width11.000
- MaterialHAWA
- TypeLong
- 200 ft reach handles large-site layouts
- 3/8 in blade stays readable across long spans
- 1/8 in and ft graduations give dual-unit convenience
- ABS orange case resists drops and weather
- Manual rewind pulls tape back without power
200 ft Long Tape Measure
The Keson NR18-200 is a 200 ft long tape measure with a 3/8 in blade designed for large-scale measuring tasks. Its open ABS case features a manual rewind function for controlled blade retrieval. The hook end allows work in narrow spaces and around obstructions. Graduated scales show 1/8 inch increments on one side and inch/foot markings on the other.
Surveyors and site teams needing extended reach
This tape suits professionals laying out foundations, roads or large plots where a 200 ft range is required. The manual rewind demands two-handed operation, so users wanting a spring-return pocket tape should look elsewhere. The 3/8 in blade width may feel bulky for detail carpentry or tight interior work. Buyers needing metric-only graduations will not find them on this blade.
200 ft capacity for outdoor layout
The blade comfortably handles full-site runs, property lines and long-form concrete work without splicing shorter tapes. At 200 ft the manual crank requires steady effort to rewind a fully extended blade, especially if dirt or moisture adds drag. The 1/8 inch graduations provide fine resolution for layout marks, while the inch/foot side speeds rough estimation. Beyond 200 ft the tool reaches its physical limit and a second tape or electronic measure becomes necessary.
Highlights
- 200 ft reach handles large-site layouts
- 3/8 in blade stays readable across long spans
- 1/8 in and ft graduations give dual-unit convenience
- ABS orange case resists drops and weather
- Manual rewind pulls tape back without power
Specifications
| Brand | Keson |
|---|---|
| Length | 15.500 |
| Width | 11.000 |
| Material | HAWA |
| Type | Long |
Questions about this item
What mounting surface or bracket is needed to secure the 15.500 by 11.000 orange ABS case on site?
The open ABS case is designed to sit flat or hang from the integrated hook; no separate bracket is required.
Can the 3/8 in blade with 1/8 in and ft graduations replace a worn fibreglass tape on an existing reel?
The blade is fixed inside the NR18-200 case and is not interchangeable with other reels.
How do I verify the 200 ft blade feeds and rewinds smoothly after first use?
Pull the blade fully out, check that the 1/8 in and ft markings align, then turn the manual rewind handle — it should retract evenly without binding.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
