We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

KENWOOD

Kenwood P-HD5RGAC1 Air Cooled 3-Amp 6.5" & 6x9" Speaker Package

SKU CH-H2KW-95708

Complete plug-and-play audio upgrade for 2014-up Harley-Davidson Road Glide motorcycles with three amplifiers, multiple speakers and custom mounting hardware

  • TypeAudio Package
  • Speaker Size6.5"
  • FeaturesHigh-performance Class D 2-Channel Power Amplifier
  • Three Class D amplifiers deliver 80W x 2 RMS per channel
  • Two 6.5" speaker pairs plus 6x9" speakers cover 20Hz to 25kHz
  • IMPP cones with 1" PEI dome tweeters handle up to 200W RMS
  • Cut-in lid kit positions 6x9" speakers toward rider with built-in water drains
  • Plug-and-play wiring and dedicated mounting plates fit 2014-up Harley Road Glide

Tailored Audio Package

The Kenwood P-HD5RGAC1 is a complete air-cooled audio system built for 2014-up Harley-Davidson Road Glide models. It combines three Class D 2-channel amplifiers, two 6.5-inch speaker pairs and 6x9-inch speakers. The plug-and-play design requires no radio flashing for installation.

Check Fairing And Bag Compatibility

Verify your motorcycle is a 2014 or newer Road Glide with hard saddlebag lids before ordering. The included cut-in lid kit modifies the bags for the 6x9-inch speakers, so confirm adequate mounting depth and that the lids can accept the required cuts. Ensure the electrical system can support the additional amplifier load.

Replaces Factory Fairing And Bag Speakers

This package upgrades the stock audio with dedicated amplification and higher-output drivers rated at 80W RMS per channel into 2 ohms. The jump is worth it when the original system lacks volume, clarity or bass response at highway speeds. Riders keeping the factory head unit or seeking a simpler install without custom fabrication will benefit most.

Highlights

  • Three Class D amplifiers deliver 80W x 2 RMS per channel
  • Two 6.5" speaker pairs plus 6x9" speakers cover 20Hz to 25kHz
  • IMPP cones with 1" PEI dome tweeters handle up to 200W RMS
  • Cut-in lid kit positions 6x9" speakers toward rider with built-in water drains
  • Plug-and-play wiring and dedicated mounting plates fit 2014-up Harley Road Glide

Specifications

BrandKENWOOD
TypeAudio Package
Speaker Size6.5"
FeaturesHigh-performance Class D 2-Channel Power Amplifier

Questions about this item

What comes in the Kenwood P-HD5RGAC1 package and is anything extra needed for installation?

The package includes three XM160-2 Class D 2-Channel amplifiers, two 6.5" XM65F and XM65R speaker pairs, 6x9" XM69R speakers, the CA-CUT14 cut-in lid kit for hard saddlebag modification, and the CA-PLT14RG3 mounting plate. All wiring is plug-and-play for 2014-up Road Glide models with no radio flash required.

How do the XM65F, XM65R and XM69R speakers differ so I can choose the right placement?

The XM65F and XM65R are 6.5" speakers with 2.25" and 2.0" mounting depths, 92 dB sensitivity, 40-25 kHz response and 150 W RMS power handling. The XM69R is a 6x9" speaker with 2.925" depth, 94 dB sensitivity, 20-25 kHz response and 200 W RMS handling. All use IMPP cones and 1" PEI dome tweeters at 2 ohm impedance.

What does the 80 W x 2 RMS rating mean when the amplifiers are running on the motorcycle?

Each XM160-2 amplifier delivers 80 watts RMS per channel into a 2 ohm load, matching the 2 ohm impedance of the included XM65F, XM65R and XM69R speakers. The Class D design runs efficiently on the bike's electrical system and the air-cooled chassis manages heat during extended rides.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.