We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Kenwood DMX4710S 6.8 inch single DIN receiver with CMOS-230LP backup camera

KENWOOD

KENWOOD DMX4710S 6.8" 1-DIN Receiver with CMOS-230LP Camera

SKU CH-ZTAW-SRGQZ

A 6.8" WSVGA capacitive touch receiver with Apple CarPlay, Android Auto, USB mirroring, iDatalink Maestro, 13-band EQ, a waterproof CMOS-230LP backup camera offering 128°/103° view and 325,000 pixels

  • TypeReceiver
  • Features6.8" WSVGA capacitive touch display for clear and responsive
  • 8" WSVGA capacitive touch display for clear and responsive interaction
  • Apple CarPlay and Android Auto support for seamless smartphone integration
  • USB mirroring lets iPhone and Android devices show content on-screen
  • iDatalink Maestro compatibility for enhanced vehicle integration and control
  • CMOS-230LP backup camera with 128° horizontal view and waterproof design

Display and smartphone integration

The Kenwood DMX4710S is a 1-DIN multimedia receiver built around a 6.8" WSVGA capacitive touchscreen. It supports Apple CarPlay and Android Auto for direct smartphone control, plus USB mirroring for both iPhone and Android devices. iDatalink Maestro compatibility allows deeper vehicle data integration.

Power output and signal chain

The unit provides 2 pre-outs rated at 2.5V alongside a dedicated subwoofer output for external amplification. A 13-band equaliser and digital time alignment let you tune the sound stage to the cabin. The receiver plays MP3, WMA, AAC, WAV, FLAC, H.264, MKV, WMV, MPEG-4 and MPEG 1/2 files from connected sources.

Camera and mounting practicalities

The included CMOS-230LP backup camera uses a 1/3.6" colour CMOS sensor with over 325,000 pixels and a 128° horizontal by 103° vertical field of view. Its waterproof housing and flexible mount base suit varied exterior positions, while a 24.5' cable harness reaches most vehicle lengths. The receiver's short chassis eases installation in tight dash openings.

Highlights

  • 8" WSVGA capacitive touch display for clear and responsive interaction
  • Apple CarPlay and Android Auto support for seamless smartphone integration
  • USB mirroring lets iPhone and Android devices show content on-screen
  • iDatalink Maestro compatibility for enhanced vehicle integration and control
  • CMOS-230LP backup camera with 128° horizontal view and waterproof design

Specifications

BrandKENWOOD
TypeReceiver
Features6.8" WSVGA capacitive touch display for clear and responsive interaction

Questions about this item

How do I install the CMOS-230LP camera and route its 24.5' cable harness?

Mount the CMOS-230LP using its flexible base, then run the 24.5' harness from the rear to the receiver's camera input; the step often missed is securing the cable away from moving parts and heat sources to prevent signal loss.

What maintenance will the CMOS-230LP camera need over time?

Periodically clean the CMOS-230LP lens to maintain the 128° horizontal and 103° vertical view, and check the harness connections for corrosion; the waterproof housing protects the 1/3.6" sensor and >325,000 pixels from moisture.

What limit appears first during extended playback of FLAC or H.264 files?

The 2.5V pre-out signal clips before the amplifier stage if gain is set too high, so adjust the 13-band EQ and digital time alignment to keep levels clean during long sessions.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.